{
  "url": "https://openlegislation.uk/eu-regulation-2017-1151/annex-Sub/8n1/division/division-3./division-3.4./division-3.4.1.",
  "json_url": "https://openlegislation.uk/eu-regulation-2017-1151/annex-Sub/8n1/division/division-3./division-3.4./division-3.4.1..json",
  "legislation": "eur/2017/1151",
  "legislation_title": "Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2017-1151",
  "path": "annex/Sub/8n1/division/division/3./division/3.4./division/3.4.1.",
  "kind": "division",
  "number": "3.4.1",
  "heading": "General requirements",
  "text": "The test procedure to determine the pure electric range and electric energy consumption shall be selected in accordance with the estimated pure electric range (PER) of the test vehicle from Table A8/3. In the case that the interpolation method is applied, the applicable test procedure shall be selected in accordance with the PER of vehicle H within the specific interpolation family.\nTable A8/3\nProcedures to determine pure electric range and electric energy consumption\nApplicable test cycle\nThe estimated PER is…\nApplicable test procedure\nTest cycle pursuant to paragraph 1.4.2.1. of this Sub-Annex.\n…less than the length of 3 applicable WLTP test cycles.\nConsecutive cycle Type 1 test procedure (in accordance with paragraph 3.4.4.1. of this Sub-Annex).\n… equal to or greater than the length of 3 applicable WLTP test cycles.\nShortened Type 1 test procedure (in accordance with paragraph 3.4.4.2. of this Sub-Annex).\nCity cycle pursuant to paragraph 1.4.2.2. of this Sub-Annex.\n…not available over the applicable WLTP test cycle.\nConsecutive cycle Type 1 test procedure (in accordance with paragraph 3.4.4.1. of this Sub-Annex).\nThe manufacturer shall give evidence to the approval authority concerning the estimated pure electric range (PER) prior to the test. In the case that the interpolation method is applied, the applicable test procedure shall be determined based on the estimated PER of vehicle H of the interpolation family. The PER determined by the applied test procedure shall confirm that the correct test procedure was applied.\nThe test sequence for the consecutive cycle Type 1 test procedure, as described in paragraphs 3.4.2., 3.4.3. and 3.4.4.1. of this Sub-Annex, as well as the corresponding REESS state of charge profile, are shown in Figure A8.App1/6 of Appendix 1 to this Sub-Annex.\nThe test sequence for the shortened Type 1 test procedure, as described in paragraphs 3.4.2., 3.4.3. and 3.4.4.2. of this Sub-Annex as well as the corresponding REESS state of charge profile, are shown in Figure A8.App1/7 in Appendix 1 to this Sub-Annex.",
  "extent": null,
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance)."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2017/1151/annex/Sub/8n1/division/division/3./division/3.4./division/3.4.1.",
    "retrieved_at": "2026-11-01T14:44:48.753743+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}