{
  "url": "https://openlegislation.uk/eu-regulation-2017-1151/annex-Sub/8n1/division/division-4./division-4.1./division-4.1.1./division-4.1.1.1.",
  "json_url": "https://openlegislation.uk/eu-regulation-2017-1151/annex-Sub/8n1/division/division-4./division-4.1./division-4.1.1./division-4.1.1.1..json",
  "legislation": "eur/2017/1151",
  "legislation_title": "Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2017-1151",
  "path": "annex/Sub/8n1/division/division/4./division/4.1./division/4.1.1./division/4.1.1.1.",
  "kind": "division",
  "number": "4.1.1.1",
  "heading": "Stepwise procedure for calculating the final test results of the charge-sustaining Type 1 test for NOVC-HEVs and OVC-HEVs",
  "text": "The results shall be calculated in the order described in Table A8/5. All applicable results in the column ‘Output’ shall be recorded. The column ‘Process’ describes the paragraphs to be used for calculation or contains additional calculations.\nFor the purpose of this table, the following nomenclature within the equations and results is used:\nccomplete applicable test cycle;\npevery applicable cycle phase;\niapplicable criteria emission component (except CO2);\nCScharge-sustaining\nCO2CO2 mass emission.\nTable A8/5\nCalculation of final charge-sustaining gaseous emission values\nSource\nInput\nProcess\nOutput\nStep No.\nSub-Annex 6\nRaw test results\nCharge-sustaining mass emissions\nParagraphs 3. to 3.2.2. of Sub-Annex 7.\nMi,CS,p,1, g/km; MCO2,CS,p,1, g/km.\n1\nOutput from step No. 1 of this table.\nMi,CS,p,1, g/km; MCO2,CS,p,1, g/km.\nCalculation of combined charge-sustaining cycle values:\nMi,CS,c,2=∑pMi,CS,p,1×dp∑pdpMCO2,CS,c,2=∑pMCO2,CS,p,1×dp∑pdpwhere:\nMi,CS,c,2 is the charge-sustaining mass emission result over the total cycle;\nMCO2,CS,c,2 is the charge-sustaining CO2 mass emission result over the total cycle;\ndp are the driven distances of the cycle phases p.\nMi,CS,c,2, g/km; MCO2,CS,c,2, g/km.\n2\nOutput from steps Nos. 1 and 2 of this table.\nMCO2,CS,p,1, g/km; MCO2,CS,c,2, g/km.\nREESS electric energy change correction\nParagraphs 4.1.1.2. to 4.1.1.5. of this Sub-Annex.\nMCO2,CS,p,3, g/km; MCO2,CS,c,3, g/km.\n3\nOutput from steps Nos. 2 and 3 of this table.\nMi,CS,c,2, g/km; MCO2,CS,c,3, g/km.\nCharge-sustaining mass emission correction for all vehicles equipped with periodically regenerating systems Ki in accordance with Sub-Annex 6, Appendix 1.\nMi,CS,c,4 = Ki × Mi,CS,c,2\nor\nMi,CS,c,4 = Ki + Mi,CS,c,2\nand\nMCO2,CS,c,4=KCO2,Ki×MCO2,CS,c,3or\nMCO2,CS,c,4=KCO2,Ki+MCO2,CS,c,3Additive offset or multiplicative factor to be used in accordance with Ki determination.\nIf Ki is not applicable:\nMi,CS,c,4 = Mi,CS,c,2\nMCO2,CS,c,4 = MCO2,CS,c,3\nMi,CS,c,4, g/km; MCO2,CS,c,4, g/km.\n4a\nOutput from steps Nos. 3 and 4a of this table.\nMCO2,CS,p,3, g/km; MCO2,CS,c,3, g/km; MCO2,CS,c,4, g/km.\nIf Ki is applicable, align CO2 phase values to combined cycle value:\nMCO2,CS,p,4 = MCO2,CS,p,3 × AFKi\nfor every cycle phase p;\nwhere:\nAFKi=MCO2,CS,c,4MCO2,CS,c,3If Ki is not applicable:\nMCO2,CS,p,4 = MCO2,CS,p,3\nMCO2,CS,p,4, g/km.\n4b\nOutput from step No. 4 of this table.\nMi,CS,c,4, g/km; MCO2,CS,p,4, g/km; MCO2,CS,c,4, g/km;\nATCT correction in accordance with paragraph 3.8.2. of Sub-Annex 6a.\nDeterioration factors calculated and applied in accordance with Annex VII.\nMi,CS,c,5, g/km; MCO2,CS,c,5, g/km; MCO2,CS,p,5, g/km.\n5\nResult of a single test.\nOutput from step No. 5 of this table.\nFor every test: Mi,CS,c,5, g/km; MCO2,CS,c,5, g/km; MCO2,CS,p,5, g/km.\nAveraging of tests and declared value in accordance with paragraphs 1.2. to 1.2.3. of Sub-Annex 6.\nMi,CS,c,6, g/km; MCO2,CS,c,6, g/km; MCO2,CS,p,6, g/km; MCO2,CS,c,declared, g/km.\n6\nMi,CS results of a Type 1 test for a test vehicle.\nOutput from step No. 6 of this table.\nMCO2,CS,c,6, g/km; MCO2,CS,p,6, g/km; MCO2,CS,c,declared, g/km.\nAlignment of phase values.\nParagraph 1.2.4. of Sub-Annex 6,\nand:\nMCO2,CS,c,7 = MCO2,CS,c,declared\nMCO2,CS,c,7, g/km; MCO2,CS,p,7, g/km.\n7\nMCO2,CS results of a Type 1 test for a test vehicle.\nOutput from steps Nos. 6 and 7 of this table.\nFor each of the test vehicles H and L:\nMi,CS,c,6, g/km; MCO2,CS,c,7, g/km; MCO2,CS,p,7, g/km.\nIf in addition to a test vehicle H a test vehicle L and, if applicable vehicle M was also tested, the resulting criteria emission value shall be the highest of the two or, if applicable, three values and referred to as Mi,CS,c.\nIn the case of the combined THC + NOx emissions, the highest value of the sum referring to either the vehicle H or vehicle L or, if applicable, vehicle M is to be declared.\nOtherwise, if no vehicle L or if applicable vehicle M was tested, Mi,CS,c = Mi,CS,c,6\nFor CO2 the values derived in step 7 of this Table shall be used.\nCO2 values shall be rounded to two decimal places.\nMi,CS,c, g/km; MCO2,CS,c,H, g/km; MCO2,CS,p,H, g/km;\nIf a vehicle L was tested:\nMCO2,CS,c,L, g/km; MCO2,CS,p,L, g/km;\nand, if applicable, a vehicle M was tested:\nMCO2,CS,c,M, g/km; MCO2,CS,p,M, g/km;\n8\nInterpolation family result.\nFinal criteria emission result.\nOutput from step No. 8 of this table.\nMCO2,CS,c,H, g/km; MCO2,CS,p,H, g/km;\nIf a vehicle L was tested:\nMCO2,CS,c,L, g/km; MCO2,CS,p,L, g/km\nand, if applicable, a vehicle M was tested:\nMCO2,CS,c,M, g/km; MCO2,CS,p,M, g/km;\nCO2 mass emission calculation in accordance with paragraph 4.5.4.1. of this Sub-Annex for individual vehicles in an interpolation family.\nCO2 values shall be rounded in accordance with Table A8/2.\nMCO2,CS,c,ind, g/km; MCO2,CS,p,ind, g/km.\n9\nResult of an individual vehicle.\nFinal CO2 result.",
  "extent": null,
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance)."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2017/1151/annex/Sub/8n1/division/division/4./division/4.1./division/4.1.1./division/4.1.1.1.",
    "retrieved_at": "2026-11-01T14:44:48.753743+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}