# Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance), Division 4.2.3: Utility factor-weighted fuel consumption for OVC-HEVs


The utility factor-weighted fuel consumption from the charge-depleting and charge-sustaining Type 1 test shall be calculated using the following equation:
FCweighted=∑j= 1kUFj× FCCD,j+1−∑j= 1kUFj× FCCSwhere:
FCweightedis the utility factor-weighted fuel consumption, l/100 km;
UFjis the utility factor of phase j according to Appendix 5 of this Sub-Annex;
FCCD,jis the fuel consumption of phase j of the charge-depleting Type 1 test, determined according to paragraph 6. of Sub-Annex 7, l/100 km;
FCCSis the fuel consumption determined according to Table A8/6, step no. 1, l/100 km;
jis the index number of the phase considered;
kis the number of phases driven up to the end of the transition cycle according to paragraph 3.2.4.4. of this Sub-Annex.
In the case that the interpolation method is applied, k shall be the number of phases driven up to the end of the transition cycle of vehicle L nveh_L.
If the transition cycle number driven by vehicle H, nvehH, and, if applicable, by an individual vehicle within the vehicle interpolation family nvehind is lower than the transition cycle number driven by vehicle L, nveh_L, the confirmation cycle of vehicle H and, if applicable, an individual vehicle shall be included in the calculation.
The fuel consumption of each phase of the confirmation cycle shall be calculated in accordance with paragraph 6. of Sub-Annex 7 with the criteria emission over the complete confirmation cycle and the applicable CO2 phase value which shall be corrected to an electric energy consumption of zero ECDC,CD,j = 0 by using the CO2 mass correction coefficient (KCO2) in accordance with Appendix 2 to this Sub-Annex.

---
Source: https://www.legislation.gov.uk/eur/2017/1151/annex/Sub/8n1/division/division/4./division/4.2./division/4.2.3. (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-1151/annex-Sub/8n1/division/division-4./division-4.2./division-4.2.3.
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.