# Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance), Division 4.4.2.1.1: The pure -electric range for the applicable WLTP test cycle PERWLTC for PEVs shall be calculated from the shortened Type 1 test as described in paragraph 3.4.4.2. of this Sub-Annex using the following equations:


PERWLTC=UBESTPECDC,WLTC
where:
UBESTPis the usable REESS energy determined from the beginning of the shortened Type 1 test procedure until the break-off criterion as defined in paragraph 3.4.4.2.3. of this Sub-Annex is reached, Wh;
ECDC,WLTCis the weighted electric energy consumption for the applicable WLTP test cycle of DS1 and DS2 of the shortened Type 1 test procedure Type 1 test, Wh/km;
and
UBESTP=ΔEREESS,DS1+ ΔEREESS,DS2+ ΔEREESS,CSSM+ ΔEREESS,CCSE
where:
ΔEREESS,DS1is the electric energy change of all REESSs during DS1 of the shortened Type 1 test procedure, Wh;
ΔEREESS,DS2is the electric energy change of all REESSs during DS2 of the shortened Type 1 test procedure, Wh;
ΔEREESS,CSSMis the electric energy change of all REESSs during CSSM of the shortened Type 1 test procedure, Wh;
ΔEREESS,CSSEis the electric energy change of all REESSs during CSSE of the shortened Type 1 test procedure, Wh;
and
ECDC,WLTC=∑j= 12ECDC,WLTC,j× KWLTC,j
where:
ECDC,WLTC,jis the electric energy consumption for the applicable WLTP test cycle of DSj of the shortened Type 1 test procedure according to paragraph 4.3. of this Sub-Annex, Wh/km;
kWLTC,jis the weighting factor for the applicable WLTP test cycle of DSj of the shortened Type 1 test procedure;
and
KWLTC,1=ΔEREESS,WLTC,1UBESTP and KWLTC,2= 1− KWLTC,1
where:
KWLTC,jis the weighting factor for the applicable WLTP test cycle of DSj of the shortened Type 1 test procedure;
ΔEREESS,WLTC,1is the electric energy change of all REESSs during the applicable WLTP test cycle from DS1 of the shortened Type 1 test procedure, Wh;

---
Source: https://www.legislation.gov.uk/eur/2017/1151/annex/Sub/8n1/division/division/4./division/4.4./division/4.4.2./division/4.4.2.1./division/4.4.2.1.1. (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-1151/annex-Sub/8n1/division/division-4./division-4.4./division-4.4.2./division-4.4.2.1./division-4.4.2.1.1.
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

