# Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance), Division 4.4.2.2.1: The pure electric range for the applicable WLTP test cycle PERWLTP for PEVs shall be calculated from the Type 1 test as described in paragraph 3.4.4.1. of this Sub-Annex using the following equations:


PERWLTC=UBECCPECDC,WLTC
where:
UBECCPis the usable REESS energy determined from the beginning of the consecutive cycle Type 1 test procedure until the break-off criterion according to paragraph 3.4.4.1.3. of this Sub-Annex is reached, Wh;
ECDC,WLTCis the electric energy consumption for the applicable WLTP test cycle determined from completely driven applicable WLTP test cycles of the consecutive cycle Type 1 test procedure, Wh/km;
and
UBECCP=∑kj= 1 ΔEREESS,j
where:
ΔEREESS,jis the electric energy change of all REESSs during phase j of the consecutive cycle Type 1 test procedure, Wh;
jis the index number of the phase considered;
kis the number of phases driven from the beginning up to and including the phase where the break-off criterion is reached;
and
ECDC,WLTC=∑nWLTCj= 1 ECDC,WLTC,j× KWLTC,j
where:
ECDC,WLTC,jis the electric energy consumption for the applicable WLTP test cycle j of the consecutive cycle Type 1 test procedure according to paragraph 4.3. of this Sub-Annex, Wh/km;
KWLTC,jis the weighting factor for the applicable WLTP test cycle j of the consecutive cycle Type 1 test procedure;
jis the index number of the applicable WLTP test cycle;
nWLTCis the whole number of complete applicable WLTP test cycles driven;
and
KWLTC,1=ΔEREESS,WLTC,1UBECCP and KWLTC,j=1− KWLTC,1nWLTC− 1 for j=2 … nWLTC
where:
ΔEREESS,WLTC,1is the electric energy change of all REESSs during the first applicable WLTP test cycle of the consecutive Type 1 test cycle procedure, Wh.

---
Source: https://www.legislation.gov.uk/eur/2017/1151/annex/Sub/8n1/division/division/4./division/4.4./division/4.4.2./division/4.4.2.2./division/4.4.2.2.1. (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-1151/annex-Sub/8n1/division/division-4./division-4.4./division-4.4.2./division-4.4.2.2./division-4.4.2.2.1.
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

