{
  "url": "https://openlegislation.uk/eu-regulation-2017-1151/annex-Sub/8n1/division/division-4./division-4.7./division-4.7.1.",
  "json_url": "https://openlegislation.uk/eu-regulation-2017-1151/annex-Sub/8n1/division/division-4./division-4.7./division-4.7.1..json",
  "legislation": "eur/2017/1151",
  "legislation_title": "Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2017-1151",
  "path": "annex/Sub/8n1/division/division/4./division/4.7./division/4.7.1.",
  "kind": "division",
  "number": "4.7.1",
  "heading": "Stepwise procedure for calculating the final test results of PEVs in case of the consecutive cycles procedure",
  "text": "For the purpose of this table, the following nomenclature within the questions and results is used:\njindex for the considered period.\nTable A8/10\nCalculation of final PEV values determined by application of the consecutive cycle Type 1 procedure\nSource\nInput\nProcess\nOutput\nStep no.\nSub-Annex 8\nTest results\nResults measured in accordance with Appendix 3 to this Sub-Annex and pre-calculated in accordance with paragraph 4.3. of this Sub-Annex.\nΔEREESS,j, Wh;\ndj, km;\n1\nUsable battery energy in accordance with paragraph 4.4.2.2.1. of this Sub-Annex.\nUBECCP, Wh;\nRecharged electric energy in accordance with paragraph 3.4.4.3. of this Sub-Annex.\nOutput available for each test.\nIn the case that the interpolation method is applied, the output is available for vehicle H and vehicle L.\nEAC, Wh.\nOutput step 1\nΔEREESS,j, Wh;\nUBECCP, Wh.\nDetermination of the number of completely driven applicable WLTC phases and cycles in accordance with paragraph 4.4.2.2. of this Sub-Annex.\nOutput available for each test.\nIn the case that the interpolation method is applied, the output is available for vehicle H and vehicle L.\nnWLTC;\nncity;\nnlow;\nnmed;\nnhigh;\nnexHigh.\n2\nOutput step 1\nΔEREESS,j, Wh;\nUBECCP, Wh.\nCalculation of weighting factors in accordance with paragraph 4.4.2.2. of this Sub-Annex.\nOutput available for each test.\nIn the case that the interpolation method is applied, the output is available for vehicle H and vehicle L.\nKWLTC,1\nKWLTC,2\nKWLTC,3\nKWLTC,4\nKcity,1\nKcity,2\nKcity,3\nKcity,4\nKlow,1\nKlow,2\nKlow,3\nKlow,4\nKmed,1\nKmed,2\nKmed,3\nKmed,4\nKhigh,1\nKhigh,2\nKhigh,3\nKhigh,4\nKexHigh,1\nKexHigh,2\nKexHigh,3\n3\nOutput step 2\nnWLTC;\nncity;\nnlow;\nnmed;\nnhigh;\nnexHigh.\nOutput step 1\nΔEREESS,j, Wh;\ndj, km;\nUBECCP, Wh.\nCalculation of electric energy consumption at the REESSs in accordance with paragraph 4.4.2.2. of this Sub-Annex.\nECDC,COP,1\nOutput available for each test.\nIn the case that the interpolation method is applied, the output is available for vehicle H and vehicle L.\nECDC,WLTC, Wh/km;\nECDC,city, Wh/km;\nECDC,low, Wh/km;\nECDC,med, Wh/km;\nECDC,high, Wh/km;\nECDC,exHigh, Wh/km;\nECDC,COP,1, Wh/km.\n4\nOutput step 2\nnWLTC;\nncity;\nnlow;\nnmed;\nnhigh;\nnexHigh.\nOutput step 3\nAll weighting factors\nOutput step 1\nUBECCP, Wh;\nCalculation of pure electric range in accordance with paragraph 4.4.2.2. of this Sub-Annex.\nOutput available for each test.\nIn the case that the interpolation method is applied, the output is available for vehicle H and vehicle L.\nPERWLTC, km;\nPERcity, km;\nPERlow, km;\nPERmed, km;\nPERhigh, km;\nPERexHigh, km.\n5\nOutput step 4\nECDC,WLTC, Wh/km;\nECDC,city, Wh/km;\nECDC,low, Wh/km;\nECDC,med, Wh/km;\nECDC,high, Wh/km;\nECDC,exHigh, Wh/km.\nOutput step 1\nEAC, Wh;\nCalculation of electric energy consumption at the mains in accordance with paragraph 4.3.4. of this Sub-Annex.\nOutput available for each test.\nIn the case that the interpolation method is applied, the output is available for vehicle H and vehicle L.\nECWLTC, Wh/km;\nECcity, Wh/km;\nEClow, Wh/km;\nECmed, Wh/km;\nEChigh, Wh/km;\nECexHigh, Wh/km.\n6\nOutput step 5\nPERWLTC, km;\nPERcity, km;\nPERlow, km;\nPERmed, km;\nPERhigh, km;\nPERexHigh, km.\nOutput step 5\nPERWLTC, km;\nPERcity, km;\nPERlow, km;\nPERmed, km;\nPERhigh, km;\nPERexHigh, km;\nAveraging of tests for all input values.\nECDC,COP,ave\nDeclaration of PERWLTC,dec and ECWLTC,dec based on PERWLTC,ave and ECWLTC,ave.\nPERWLTC,dec and ECWLTC,dec shall be rounded as defined in Table A6/1.\nIn the case that the interpolation method is applied, the output is available for vehicle H and vehicle L.\nPERWLTC,dec, km;\nPERWLTC,ave, km;\nPERcity,ave, km;\nPERlow,ave, km;\nPERmed,ave, km;\nPERhigh,ave, km;\nPERexHigh,ave, km;\n7\nOutput step 6\nECWLTC, Wh/km;\nECcity, Wh/km;\nEClow, Wh/km;\nECmed, Wh/km;\nEChigh, Wh/km;\nECexHigh, Wh/km.\nECWLTC,dec, Wh/km;\nECWLTC,ave, Wh/km;\nECcity,ave, Wh/km;\nEClow,ave, Wh/km;\nECmed,ave, Wh/km;\nEChigh,ave, Wh/km;\nECexHigh,ave, Wh/km;\nECDC,COP,ave, Wh/km.\nOutput step 4\nECDC,COP,1, Wh/km.\nOutput step 7\nECWLTC,dec, Wh/km;\nECWLTC,ave, Wh/km;\nECDC,COP,ave, Wh/km.\nDetermination of the adjustment factor and application to ECDC,COP,ave.\nFor example:\nAF=ECWLTC,decECWLTC,aveECDC,COP = ECDC,COP,ave × AF\nIn the case that the interpolation method is applied, the output is available for vehicle H and vehicle L.\nECDC,COP, Wh/km.\n8\nOutput step 7\nPERcity,ave, km;\nPERlow,ave, km;\nPERmed,ave, km;\nPERhigh,ave, km;\nPERexHigh,ave, km;\nIntermediate rounding.\nECDC,COP,final\nIn the case that the interpolation method is applied, the output is available for vehicle H and vehicle L.\nPERcity,final, km;\nPERlow,final, km;\nPERmed,final, km;\nPERhigh,final, km;\nPERexHigh,final, km;\n9\nECcity,ave, Wh/km;\nEClow,ave, Wh/km;\nECmed,ave, Wh/km;\nEChigh,ave, Wh/km;\nECexHigh,ave, Wh/km;\nECcity,final, Wh/km;\nEClow,final, Wh/km;\nECmed,final, Wh/km;\nEChigh,final, Wh/km;\nECexHigh,final, Wh/km;\nOutput step 8\nECDC,COP, Wh/km.\nECDC,COP,final, Wh/km.\nOutput step 7\nPERWLTC,dec, km;\nInterpolation in accordance with paragraph 4.5. of this Sub-Annex, and final rounding as defined in Table A8/2.\nECDC,COP,ind\nIn the case that the interpolation method is applied, the output available for each individual vehicle.\nPERWLTC,ind, km;\nPERcity,ind, km;\nPERlow,ind, km;\nPERmed,ind, km;\nPERhigh,ind, km;\nPERexHigh,ind, km;\n10\nOutput step 9\nECWLTC,dec, Wh/km;\nPERcity,final, km;\nPERlow,final, km;\nPERmed,final, km;\nPERhigh,final, km;\nPERexHigh,final, km;\nECcity,final, Wh/km;\nEClow,final, Wh/km;\nECmed,final, Wh/km;\nEChigh,final, Wh/km;\nECexHigh,final, Wh/km;\nECWLTC,ind, Wh/km;\nECcity,ind, Wh/km;\nEClow,ind, Wh/km;\nECmed,ind, Wh/km;\nEChigh,ind, Wh/km;\nECexHigh,ind, Wh/km;\nECDC,COP,final, Wh/km.\nECDC,COP,ind, Wh/km.",
  "extent": null,
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Inserted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance)."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2017/1151/annex/Sub/8n1/division/division/4./division/4.7./division/4.7.1.",
    "retrieved_at": "2026-11-01T14:44:48.753743+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}