# Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance), Division 2.2: Documentation


Original replacement pollution control devices shall be accompanied by the following information:
(a)the vehicle manufacturer’s name or trade mark;
(b)the make and identifying part number of the original replacement pollution control device as recorded in the information mentioned in point 2.3;
(c)the vehicles for which the original replacement pollution control device is of a type covered by point 2.3 of the Addendum to Appendix 4 to Annex I, including, where applicable, a marking to identify if the original replacement pollution control device is suitable for fitting to a vehicle that is equipped with an on-board diagnostic (OBD) system;
(d)installation instructions, where necessary.
This information shall be available in the product catalogue distributed to points of sale by the vehicle manufacturer.

---
Source: https://www.legislation.gov.uk/eur/2017/1151/annex/XIII/division/1/division/2/division/2.2 (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-1151/annex-XIII/division-1/division-2/division-2.2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.