{
  "url": "https://openlegislation.uk/eu-regulation-2017-1151/annex-XVII/division/division-1.",
  "json_url": "https://openlegislation.uk/eu-regulation-2017-1151/annex-XVII/division/division-1..json",
  "legislation": "eur/2017/1151",
  "legislation_title": "Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2017-1151",
  "path": "annex/XVII/division/division/1.",
  "kind": "division",
  "number": "1",
  "heading": "Appendix 3 to Annex I of Regulation (EC) No 692/2008 is hereby amended as follows:",
  "text": "(a)Points 3. to 3.1.1. shall be amended to read:\n‘3.\nPROPULSION ENERGY CONVERTER (k)\n3.1.\nManufacturer of the propulsion energy converter(s): …\n3.1.1.\nManufacturer's code (as marked on the propulsion energy converter or other means of identification): …’\n(b)Point 3.2.1.8. shall be amended to read:\n‘3.2.1.8.\nRated engine power (n): … kW at … min–1 (manufacturer's declared value)’\n(c)Point 3.2.2.2. shall be renumbered 3.2.2.1.1. and shall read as follows:\n‘3.2.2.1.1.\nRON, unleaded: …’\n(d)Point 3.2.4.2.1. shall be amended to read:\n‘3.2.4.2.1.\nSystem description (common rail/unit injectors/distribution pump etc.): …’\n(e)Point 3.2.4.2.3. shall be amended to read:\n‘3.2.4.2.3.\nInjection/Delivery pump’\n(f)Point 3.2.4.2.4. shall be amended to read:\n‘3.2.4.2.4.\nEngine speed limitation control’\n(g)Point 3.2.4.2.9.3. shall be amended to read:\n‘3.2.4.2.9.3.\nDescription of the system’\n(h)Points 3.2.4.2.9.3.6. to 3.2.4.2.9.3.8. shall be amended to read:\n‘3.2.4.2.9.3.6.\nMake and type or working principle of water temperature sensor: …\n3.2.4.2.9.3.7.\nMake and type or working principle of air temperature sensor: …\n3.2.4.2.9.3.8.\nMake and type or working principle of air pressure sensor: …’\n(i)Point 3.2.4.3.4.3. shall be amended to read:\n‘3.2.4.3.4.3.\nMake and type or working principle of air-flow sensor: …’\n(j)Points 3.2.4.3.4.9. to 3.2.4.3.4.11. shall be amended to read:\n‘3.2.4.3.4.9.\nMake and type or working principle of water temperature sensor: …\n3.2.4.3.4.10.\nMake and type or working principle of air temperature sensor: …\n3.2.4.3.4.11.\nMake and type or working principle of air pressure sensor: …’\n(k)Point 3.2.4.3.5. shall be amended to read:\n‘3.2.4.3.5.\nInjectors’\n(l)Points 3.2.12.2. to 3.2.12.2.1. shall be amended to read:\n‘3.2.12.2.\nPollution control devices (if not covered by another heading)\n3.2.12.2.1.\nCatalytic converter’\n(m)Points 3.2.12.2.1.11. to 3.2.12.2.1.11.10 shall be deleted\n(n)Points 3.2.12.2.2. to 3.2.12.2.2.5. shall be deleted and replaced with the following:\n‘3.2.12.2.2.\nSensors\n3.2.12.2.2.1.\nOxygen sensor: yes/no (1)\n3.2.12.2.2.1.1.\nMake: …\n3.2.12.2.2.1.2.\nLocation: …\n3.2.12.2.2.1.3.\nControl range: …\n3.2.12.2.2.1.4.\nType or working principle: …\n3.2.12.2.2.1.5.\nIdentifying part number: …’\n(o)Points 3.2.12.2.4.1. to 3.2.12.2.4.2. shall be amended to read:\n‘3.2.12.2.4.1.\nCharacteristics (make, type, flow, high pressure / low pressure / combined pressure, etc.): …\n3.2.12.2.4.2.\nWater-cooled system (to be specified for each EGR system e.g. low pressure / high pressure / combined pressure: yes/no (1)’\n(p)Points 3.2.12.2.5. to 3.2.12.2.5.6. shall be amended to read:\n‘3.2.12.2.5.\nEvaporative emissions control system (petrol and ethanol engines only): yes/no (1)\n3.2.12.2.5.1.\nDetailed description of the devices: …\n3.2.12.2.5.2.\nDrawing of the evaporative emissions control system: …\n3.2.12.2.5.3.\nDrawing of the carbon canister: …\n3.2.12.2.5.4.\nMass of dry charcoal: … g\n3.2.12.2.5.5.\nSchematic drawing of the fuel tank with indication of capacity and material (petrol and ethanol engines only): …\n3.2.12.2.5.6.\nDescription and schematic of the heat shield between tank and exhaust system: …’\n(q)Points 3.2.12.2.6.4. to 3.2.12.2.6.4.4. shall be deleted\n(r)Points 3.2.12.2.6.5. and 3.2.12.2.6.6. shall be renumbered to read:\n‘3.2.12.2.6.4.\nMake of particulate trap: …\n3.2.12.2.6.5.\nIdentifying part number: …’\n(s)Points 3.2.12.2.8. shall be amended to read:\n‘3.2.12.2.8.\nOther system: …’\n(t)New points 3.2.12.2.10. to 3.2.12.2.11.8. shall be added as follows:\n‘3.2.12.2.10.\nPeriodically regenerating system: (provide the information below for each separate unit)\n3.2.12.2.10.1.\nMethod or system of regeneration, description and/or drawing: …\n3.2.12.2.10.2.\nThe number of Type 1 operating cycles, or equivalent engine test bench cycles, between two cycles where regenerative phases occur under the conditions equivalent to Type 1 test (Distance “D” in Figure A6.App1/1 in Appendix 1 to Sub-Annex 6 of Annex XXI to Regulation (EU) 2017/1151 or figure A13/1 in Annex 13 to UN/ECE Regulation 83 (as applicable)): …\n3.2.12.2.10.2.1.\nApplicable Type 1 cycle: (indicate the applicable procedure: Annex XXI, Sub-Annex 4 or UN/ECE Regulation 83): …\n3.2.12.2.10.3.\nDescription of method employed to determine the number of cycles between two cycles where regenerative phases occur: …\n3.2.12.2.10.4.\nParameters to determine the level of loading required before regeneration occurs (i.e. temperature, pressure etc.): …\n3.2.12.2.10.5.\nDescription of method used to load system in the test procedure described in paragraph 3.1., Annex 13 to UN/ECE Regulation 83: …\n3.2.12.2.11.\nCatalytic converter systems using consumable reagents (provide the information below for each separate unit) yes/no (1)\n3.2.12.2.11.1.\nType and concentration of reagent needed: …\n3.2.12.2.11.2.\nNormal operational temperature range of reagent: …\n3.2.12.2.11.3.\nInternational standard: …\n3.2.12.2.11.4.\nFrequency of reagent refill: continuous/maintenance (where appropriate):\n3.2.12.2.11.5.\nReagent indicator: (description and location)\n3.2.12.2.11.6.\nReagent tank\n3.2.12.2.11.6.1.\nCapacity: …\n3.2.12.2.11.6.2.\nHeating system: yes/no (1)\n3.2.12.2.11.6.2.1.\nDescription or drawing\n3.2.12.2.11.7.\nReagent control unit: yes/no (1)\n3.2.12.2.11.7.1.\nMake: …\n3.2.12.2.11.7.2.\nType: …\n3.2.12.2.11.8.\nReagent injector (make, type and location): …’\n(u)Point 3.2.15.1. shall be amended to read:\n‘3.2.15.1.\nType-approval number according to Regulation (EC) No 661/2009 (OJ L 200, 31.7.2009, p. 1)’\n(v)Point 3.2.16.1. shall be amended to read:\n‘3.2.16.1.\nType-approval number according to Regulation (EC) No 661/2009 (OJ L 200, 31.7.2009, p. 1)’\n(w)Point 3.3. shall be amended to read:\n‘3.3.\nElectric machine’\n(x)Point 3.3.2. shall be amended to read:\n‘3.3.2.\nREESS’\n(y)Point 3.4. shall be amended to read:\n‘3.4.\nCombinations of propulsion energy converters’\n(z)Point 3.4.4. shall be amended to read:\n‘3.4.4.\nDescription of the energy storage device: (REESS, capacitor, flywheel/generator)’\n(aa)Point 3.4.4.5. shall be amended to read:\n‘3.4.4.5.\nEnergy: … (for REESS: voltage and capacity Ah in 2 h, for capacitor: J, …)’\n(bb)Point 3.4.5. shall be amended to read:\n‘3.4.5.\nElectric machine (describe each type of electric machine separately)’\n(cc)Point 3.5. shall be amended to read:\n‘3.5.\nManufacturer’s declared values for determination of CO2 emissions/fuel consumption/electric consumption/electric range and details of eco-innovations (where applicable)(o)’\n(dd)Point 4.4. shall be amended to read:\n‘4.4.\nClutch(es)’\n(ee)Point 4.6. shall be amended to read:\n‘4.6.\nGear ratios\nGear\nInternal gearbox ratios (ratios of engine to gearbox output shaft revolutions)\nFinal drive ratio(s) (ratio of gearbox output shaft to driven wheel revolutions)\nTotal gear ratios\nMaximum for CVT\n1\n2\n3\n…\nMinimum for CVT\n’\n(ff)Point 6.6. to 6.6.3. shall be replaced as follows:\n‘6.6.\nTyres and wheels\n6.6.1.\nTyre/wheel combination(s)\n6.6.1.1.\nAxles\n6.6.1.1.1.\nAxle 1: …\n6.6.1.1.1.1.\nTyre size designation\n6.6.1.1.2.\nAxle 2: …\n6.6.1.1.2.1.\nTyre size designation\netc.\n6.6.2.\nUpper and lower limits of rolling radii\n6.6.2.1.\nAxle 1: …\n6.6.2.2.\nAxle 2: …\netc.\n6.6.3.\nTyre pressure(s) as recommended by the vehicle manufacturer: … kPa’\n(gg)Point 9.1. shall be amended to read:\n‘9.1.\nType of bodywork using the codes defined in Part C of Annex II of Directive 2007/46/EC: …’",
  "extent": null,
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2017/1151/annex/XVII/division/division/1.",
    "retrieved_at": "2026-11-01T14:44:48.753743+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}