# Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (Text with EEA relevance), Division 3: Set of input parameters

Extent: E+W+S+N.I.

Table 1
Input parameters ‘ Vehicle/General ’
In case of multiple PTOs mounted to the transmission, only the component with the highest losses according to point 3.6 of Annex IX, for its combination of criteria ‘ PTOShaftsGearWheels ’ and ‘ PTOShaftsOtherElements ’ , shall be declared.
Parameter name
Parameter ID
Type
Unit
Description/Reference
Manufacturer
P235
token
[-]
ManufacturerAddress
P252
token
[-]
Model
P236
token
[-]
VIN
P238
token
[-]
Date
P239
dateTime
[-]
Date and time when the component-hash is created
LegislativeClass
P251
string
[-]
Allowed values: ‘ N2 ’ , ‘ N3 ’
VehicleCategory
P036
string
[-]
Allowed values: ‘ Rigid Lorry ’ , ‘ Tractor ’
AxleConfiguration
P037
string
[-]
Allowed values: ‘ 4×2 ’ , ‘ 6×2 ’ , ‘ 6×4 ’ , ‘ 8×4 ’
CurbMassChassis
P038
int
[kg]
GrossVehicleMass
P041
int
[kg]
IdlingSpeed
P198
int
[1/min]
RetarderType
P052
string
[-]
Allowed values: ‘ None ’ , ‘ Losses included in Gearbox ’ , ‘ Engine Retarder ’ , ‘ Transmission Input Retarder ’ , ‘ Transmission Output Retarder ’
RetarderRatio
P053
double, 3
[-]
AngledriveType
P180
string
[-]
Allowed values: ‘ None ’ , ‘ Losses included in Gearbox ’ , ‘ Separate Angledrive ’
PTOShaftsGearWheels
P247
string
[-]
Allowed values: ‘ none ’ , ‘ only the drive shaft of the PTO ’ , ‘ drive shaft and/or up to 2 gear wheels ’ , ‘ drive shaft and/or more than 2 gear wheels ’ , ‘ only one engaged gearwheel above oil level ’
PTOOtherElements
P248
string
[-]
Allowed values: ‘ none ’ , ‘ shift claw, synchronizer, sliding gearwheel ’ , ‘ multi-disc clutch ’ , ‘ multi-disc clutch, oil pump ’
CertificationNumberEngine
P261
token
[-]
CertificationNumberGearbox
P262
token
[-]
CertificationNumberTorqueconverter
P263
token
[-]
CertificationNumberAxlegear
P264
token
[-]
CertificationNumberAngledrive
P265
token
[-]
CertificationNumberRetarder
P266
token
[-]
CertificationNumberTyre
P267
token
[-]
CertificationNumberAirdrag
P268
token
[-]
ZeroEmissionVehicle
P269
boolean
[-]
VocationalVehicle
P270
boolean
[-]
NgTankSystem
P275
string
[-]
Allowed values: ‘ Compressed ’ , ‘ Liquefied ’
Only relevant for vehicles with engines of fuel type ‘ NG PI ’ (P193)
Sleeper cab
P276
boolean
[-]
Table 2
Input parameters ‘Vehicle/AxleConfiguration’ per wheel axle
Parameter name
Parameter ID
Type
Unit
Description/Reference
TwinTyres
P045
boolean
[-]
AxleType
P154
string
[-]
Allowed values: ‘VehicleNonDriven’, ‘VehicleDriven’
Steered
P195
boolean
Table 3
Input parameters ‘Vehicle/Auxiliaries’
Parameter name
Parameter ID
Type
Unit
Description/Reference
Fan/Technology
P181
string
[-]
Allowed values: ‘Crankshaft mounted - Electronically controlled visco clutch’, ‘Crankshaft mounted - Bimetallic controlled visco clutch’, ‘Crankshaft mounted - Discrete step clutch’, ‘Crankshaft mounted - On/off clutch’, ‘Belt driven or driven via transm. - Electronically controlled visco clutch’, ‘Belt driven or driven via transm. - Bimetallic controlled visco clutch’, ‘Belt driven or driven via transm. - Discrete step clutch’, ‘Belt driven or driven via transm. - On/off clutch’, ‘Hydraulic driven - Variable displacement pump’, ‘Hydraulic driven - Constant displacement pump’, ‘Electrically driven - Electronically controlled’
SteeringPump/Technology
P182
string
[-]
Allowed values: ‘Fixed displacement’, ‘Fixed displacement with elec. control’, ‘Dual displacement’, ‘Variable displacement mech. controlled’, ‘Variable displacement elec. controlled’, ‘Electric’
Separate entry for each steered wheel axle required
ElectricSystem/Technology
P183
string
[-]
Allowed values: ‘Standard technology’, ‘Standard technology - LED headlights, all’
PneumaticSystem/Technology
P184
string
[-]
Allowed values: ‘Small’, ‘Small + ESS’, ‘Small + visco clutch’ , ‘Small + mech. clutch’, ‘Small + ESS + AMS’, ‘Small + visco clutch + AMS’, ‘Small + mech. clutch + AMS’, ‘Medium Supply 1-stage’, ‘Medium Supply 1-stage + ESS’, ‘Medium Supply 1-stage + visco clutch’ , ‘Medium Supply 1-stage + mech. clutch’, ‘Medium Supply 1-stage + ESS + AMS’, ‘Medium Supply 1-stage + visco clutch + AMS’, ‘Medium Supply 1-stage + mech. clutch + AMS’, ‘Medium Supply 2-stage’, ‘Medium Supply 2-stage + ESS’, ‘Medium Supply 2-stage + visco clutch’ , ‘Medium Supply 2-stage + mech. clutch’, ‘Medium Supply 2-stage + ESS + AMS’, ‘Medium Supply 2-stage + visco clutch + AMS’, ‘Medium Supply 2-stage + mech. clutch + AMS’, ‘Large Supply’, ‘Large Supply + ESS’, ‘Large Supply + visco clutch’ , ‘Large Supply + mech. clutch’, ‘Large Supply + ESS + AMS’, ‘Large Supply + visco clutch + AMS’, ‘Large Supply + mech. clutch + AMS’; ‘Vacuum pump’
HVAC/Technology
P185
string
[-]
Allowed values: ‘ None ’ , ‘ Default ’
Table 4
Input parameters ‘Vehicle/EngineTorqueLimits’ per gear (optional)
Parameter name
Parameter ID
Type
Unit
Description/Reference
Gear
P196
integer
[-]
only gear numbers need to be specified where vehicle related engine torque limits according to point 6 are applicable
MaxTorque
P197
integer
[Nm]
Table 5
Input parameters for ZE-HDVs, He-HDVs and dual-fuel vehicles
Parameter name
Parameter ID
Type
Unit
Description/Reference
Manufacturer
P235
token
[-]
ManufacturerAddress
P252
token
[-]
Model
P236
token
[-]
VIN
P238
token
[-]
Date
P239
dateTime
[-]
Date and time when the component-hash is created
LegislativeClass
P251
string
[-]
Allowed values: ‘ N2 ’ , ‘ N3 ’
VehicleCategory
P036
string
[-]
Allowed values: ‘ Rigid Lorry ’ , ‘ Tractor ’
CurbMassChassis
P038
int
[kg]
GrossVehicleMass
P041
int
[kg]
MaxNetPower1
P277
int
[W]
If He-HDV = Y: highest maximum net power of all energy converters, which are linked to the vehicle driveline or the wheels
MaxNetPower2
P278
int
[W]
If He-HDV = Y: second highest maximum net power of all energy converters, which are linked to the vehicle driveline or the wheels
ZE-HDV
P269
boolean
[-]
He-HDV
P279
boolean
[-]
DualFuelVehicle
P280
boolean
[-]
Table 6
Input parameters ‘ Advanced driver assistance systems ’
Parameter name
Parameter ID
Type
Unit
Description/Reference
EngineStopStart
P271
boolean
[-]
In accordance with point 8.1.1
EcoRollWithoutEngineStop
P272
boolean
[-]
In accordance with point 8.1.2
EcoRollWithEngineStop
P273
boolean
[-]
In accordance with point 8.1.3
PredictiveCruiseControl
P274
string
[-]
In accordance with point 8.1.4, allowed values: ‘ 1,2 ’ , ‘ 1,2,3 ’

---
Source: https://www.legislation.gov.uk/eur/2017/2400/annex/III/division/3 (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-2400/annex-III/division-3
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.