# Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (Text with EEA relevance), Division 3.4: Pneumatic system

Extent: E+W+S+N.I.

For pneumatic systems working with over pressure the standard power values [W] as shown in Table 7 shall be used depending on application and technology.
Table 7
Mechanical power demand of pneumatic systems (over pressure)
Size of air supply
Technology
Long Haul
Regional Delivery
Urban Delivery
Municipal Utility
Construction
Pmean
Pmean
Pmean
Pmean
Pmean
[W]
[W]
[W]
[W]
[W]
small
displ. ≤ 250 cm3
1 cyl./2 cyl.
Baseline
1 400
1 300
1 200
1 200
1 300
+ ESS
– 500
– 500
– 400
– 400
– 500
+ visco clutch
– 600
– 600
– 500
– 500
– 600
+ mech. clutch
– 800
– 700
– 550
– 550
– 700
+ AMS
– 400
– 400
– 300
– 300
– 400
medium
250 cm3 < displ. ≤ 500 cm3
1 cyl./2 cyl. 1-stage
Baseline
1 600
1 400
1 350
1 350
1 500
+ ESS
– 600
– 500
– 450
– 450
– 600
+ visco clutch
– 750
– 600
– 550
– 550
– 750
+ mech. clutch
– 1 000
– 850
– 800
– 800
– 900
+ AMS
– 400
– 200
– 200
– 200
– 400
medium
250 cm3 < displ. ≤ 500 cm3
1 cyl./2 cyl. 2-stage
Baseline
2 100
1 750
1 700
1 700
2 100
+ ESS
– 1 000
– 700
– 700
– 700
– 1 100
+ visco clutch
– 1 100
– 900
– 900
– 900
– 1 200
+ mech. clutch
– 1 400
– 1 100
– 1 100
– 1 100
– 1 300
+ AMS
– 400
– 200
– 200
– 200
– 500
large
displ. > 500 cm3
1 cyl./2 cyl.
1-stage/2-stage
Baseline
4 300
3 600
3 500
3 500
4 100
+ ESS
– 2 700
– 2 300
– 2 300
– 2 300
– 2 600
+ visco clutch
– 3 000
– 2 500
– 2 500
– 2 500
– 2 900
+ mech. clutch
– 3 500
– 2 800
– 2 800
– 2 800
– 3 200
+ AMS
– 500
– 300
– 200
– 200
– 500
For pneumatic systems working with vacuum (negative pressure) the standard power values [W] as shown in Table 8 shall be used.
Table 8
Mechanical power demand of pneumatic systems (vacuum pressure)
Long Haul
Regional Delivery
Urban Delivery
Municipal Utility
Construction
Pmean
Pmean
Pmean
Pmean
Pmean
[W]
[W]
[W]
[W]
[W]
Vacuum pump
190
160
130
130
130
Fuel saving technologies can be considered by subtracting the corresponding power demand from the power demand of the baseline compressor.
The following combinations of technologies are not considered:
(a) ESS and clutches
(b) Visco clutch and mechanical clutch
In case of a two-stage compressor, the displacement of the first stage shall be used to describe the size of the air compressor system

---
Source: https://www.legislation.gov.uk/eur/2017/2400/annex/IX/division/3/division/3.4 (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-2400/annex-IX/division-3/division-3.4
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

