# Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (Text with EEA relevance), Appendix 12

Extent: E+W+S+N.I.

Input parameters for the simulation tool
Introduction
This Appendix describes the list of parameters to be provided by the transmission, torque converter (TC), other torque transferring components (OTTC) and additional driveline components (ADC) manufacturer as input to the simulation tool. The applicable XML schema as well as example data are available at the dedicated electronic distribution platform.
Definitions
(1) ‘Parameter ID’:Unique identifier as used in ‘Simulation tool’ for a specific input parameter or set of input data
(2) ‘Type’:Data type of the parameter
string …sequence of characters in ISO8859-1 encoding
token …sequence of characters in ISO8859-1 encoding, no leading/trailing whitespace
date …date and time in UTC time in the format: YYYY-MM-DDTHH:MM:SSZ with italic letters denoting fixed characters e.g. ‘2002-05-30T09:30:10Z’
integer …value with an integral data type, no leading zeros, e.g. ‘1800’
double, X …fractional number with exactly X digits after the decimal sign (‘.’) and no leading zeros e.g. for ‘double, 2’: ‘2345.67’; for ‘double, 4’: ‘45.6780’
(3) ‘Unit’ …physical unit of the parameter
Set of input parameters
Table 1
Input parameters ‘ Transmission/General ’
DCT shall be declared as transmission type AMT.
Parameter name
Parameter ID
Type
Unit
Description/Reference
Manufacturer
P205
token
[-]
Model
P206
token
[-]
CertificationNumber
P207
token
[-]
Date
P208
dateTime
[-]
Date and time when the component-hash is created
AppVersion
P209
token
[-]
TransmissionType
P076
string
[-]
Allowed values : ‘SMT’, ‘AMT’, ‘APT-S’, ‘APT-P’
MainCertificationMethod
P254
string
[-]
Allowed values: ‘ Option 1 ’ , ‘ Option 2 ’ , ‘ Option 3 ’ , ‘ Standard values ’
Table 2
Input parameters ‘Transmission/Gears’ per gear
Parameter name
Parameter ID
Type
Unit
Description/Reference
GearNumber
P199
integer
[-]
Ratio
P078
double, 3
[-]
MaxTorque
P157
integer
[Nm]
optional
MaxSpeed
P194
integer
[1/min]
optional
Table 3
Input parameters ‘Transmission/LossMap’ per gear and for each grid point in the loss map
Parameter name
Parameter ID
Type
Unit
Description/Reference
InputSpeed
P096
double, 2
[1/min]
InputTorque
P097
double, 2
[Nm]
TorqueLoss
P098
double, 2
[Nm]
Table 4
Input parameters ‘TorqueConverter/General’
Parameter name
Parameter ID
Type
Unit
Description/Reference
Manufacturer
P210
token
[-]
Model
P211
token
[-]
CertificationNumber
P212
token
[-]
Date
P213
dateTime
[-]
Date and time when the component-hash is created
AppVersion
P214
string
[-]
CertificationMethod
P257
string
[-]
Allowed values: ‘Measured’, ‘Standard values’
Table 5
Input parameters ‘TorqueConverter/Characteristics’ for each grid point in the characteristic curve
Parameter name
Parameter ID
Type
Unit
Description/Reference
SpeedRatio
P099
double, 4
[-]
TorqueRatio
P100
double, 4
[-]
InputTorqueRef
P101
double, 2
[Nm]
Table 6
Input parameters ‘Angledrive/General’ (only required if component applicable)
Parameter name
Parameter ID
Type
Unit
Description/Reference
Manufacturer
P220
token
[-]
Model
P221
token
[-]
CertificationNumber
P222
token
[-]
Date
P223
dateTime
[-]
Date and time when the component-hash is created
AppVersion
P224
string
[-]
Ratio
P176
double, 3
[-]
CertificationMethod
P258
string
[-]
Allowed values: ‘Option 1’, ‘Option 2’, ‘Option 3’, ‘Standard values’
Table 7
Input parameters ‘Angledrive/LossMap’ for each grid point in the loss map (only required if component applicable)
Parameter name
Parameter ID
Type
Unit
Description/Reference
InputSpeed
P173
double, 2
[1/min]
InputTorque
P174
double, 2
[Nm]
TorqueLoss
P175
double, 2
[Nm]
Table 8
Input parameters ‘Retarder/General’ (only required if component applicable)
Parameter name
Parameter ID
Type
Unit
Description/Reference
Manufacturer
P225
token
[-]
Model
P226
token
[-]
CertificationNumber
P227
token
[-]
Date
P228
dateTime
[-]
Date and time when the component-hash is created
AppVersion
P229
string
[-]
CertificationMethod
P255
string
[-]
Allowed values: ‘Measured’, ‘Standard values’
Table 9
Input parameters ‘Retarder/LossMap’ for each grid point in the characteristic curve (only required if component applicable)
Parameter name
Parameter ID
Type
Unit
Description/Reference
RetarderSpeed
P057
double, 2
[1/min]
TorqueLoss
P058
double, 2
[Nm]

---
Source: https://www.legislation.gov.uk/eur/2017/2400/annex/VI/appendix/12 (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-2400/annex-VI/appendix-12
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.