# Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (Text with EEA relevance), Appendix 5

Extent: E+W+S+N.I.

Additional driveline components (ADC) information document
Information document no.:
Issue:
Date of issue:
Date of Amendment:
pursuant to …
ADC type/family (if applicable):
…
0.
GENERAL
0.1
Name and address of manufacturer
0.2
Make (trade name of manufacturer):
0.3
ADC type:
0.4
ADC family:
0.5
ADC type as separate technical unit/ADC family as separate technical unit
0.6
Commercial name(s) (if available):
0.7
Means of identification of model, if marked on the ADC:
0.8
In the case of components and separate technical units, location and method of affixing of the GB approval mark:
0.9
Name(s) and address(es) of assembly plant(s):
0.10
Name and address of the manufacturer's representative:
PART 1
ESSENTIAL CHARACTERISTICS OF THE (PARENT) ADC AND THE ADC TYPES WITHIN AN ADC FAMILY
Parent-ADC
Family member
#1
#2
#3
0.0
GENERAL
0.1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.8.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.9.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.0
SPECIFIC ADC/ANGLE DRIVE INFORMATION
1.1
Gear ratio and gearscheme
1.2
Angle between input/output shaft
1.3
Type of bearings at corresponding positions
1.4
Number of teeth per gearwheel
1.5
Single gear width
1.6
Number of dynamic shaft seals
1.7
Oil viscosity (± 10 %)
1.8
Surface roughness of the teeth
1.9
Specified oil level in reference to central axis and in accordance with the drawing specification (based on average value between lower and upper tolerance) in static or running condition. The oil level is considered as equal if all rotating transmission parts (except for the oil pump and the drive thereof) are located above the specified oil level
1.10
Oil level within (± 1mm).
LIST OF ATTACHMENTS
No.:
Description:
Date of issue:
1
Information on ADC test conditions
…
2
…

---
Source: https://www.legislation.gov.uk/eur/2017/2400/annex/VI/appendix/5 (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-2400/annex-VI/appendix-5
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.