{
  "url": "https://openlegislation.uk/eu-regulation-2017-2400/annex-VI/appendix-7",
  "json_url": "https://openlegislation.uk/eu-regulation-2017-2400/annex-VI/appendix-7.json",
  "legislation": "eur/2017/2400",
  "legislation_title": "Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2017-2400",
  "path": "annex/VI/appendix/7",
  "kind": "appendix",
  "number": "7",
  "heading": null,
  "text": "Markings and numbering\n1.\nMarkings\nIn the case of a component being certified in accordance with this Annex, the component shall bear:\n1.1.\nThe manufacturer's name or trade mark\n1.2.\nThe make and identifying type indication as recorded in the information referred to in point 0.2 and 0.3 of Appendices 2 - 5 to this Annex\n1.3\nThe certification mark as a rectangle surrounding the lower-case letter ‘g’ followed by the number 11.\n1.4\nThe certification mark shall also include in the vicinity of the rectangle the ‘base approval number’ as specified for Section 4 of the type-approval number set out in point 2.4 of Annex IV to Commission Implementing Regulation (EU) 2020/683, preceded by the two figures indicating the sequence number assigned to the latest technical amendment to this Regulation and by an alphabetical character indicating the part for which the certificate has been granted.\nFor this Regulation, the sequence number shall be 00.\nFor this Regulation, the alphabetical character shall be the one laid down in Table 1.\nTable 1\nG\nTransmission\nC\nTorque Converter (TC)\nO\nOther torque transferring component (OTTC)\nD\nAdditional driveline component (ADC)\n1.5.\nExample of the certification mark\nThe above certification mark affixed to a transmission, torque converter (TC), other torque transferring component (OTTC) or additional driveline component (ADC) shows that the type concerned has been certified ... pursuant to this Regulation. The first two digits (00) are indicating the sequence number assigned to the latest technical amendment to this Regulation. The following digit indicates that the certification was granted for a transmission (G). The last four digits (0004) are those allocated by the approval authority to the transmission, as the base approval number.\n1.6\nOn request of the applicant for certificate and after prior agreement with the approval authority other type sizes than indicated in 1.5 may be used. Those other type sizes shall remain clearly legible.\n1.7\nThe markings, labels, plates or stickers must be durable for the useful life of the transmission, torque converter (TC), other torque transferring components (OTTC) or additional driveline components (ADC) and must be clearly legible and indelible. The manufacturer shall ensure that the markings, labels, plates or sticker cannot be removed without destroying or defacing them.\n1.8\nIn the case separate certifications are granted by the same approval authority for a transmission, a torque converter, other torque transferring components or additional driveline components and those parts are installed in combination, the indication of one certification mark referred to in point 1.3 is sufficient. This certification mark shall be followed by the applicable markings specified in point 1.4 for the respective transmission, torque converter, other torque transferring component or additional driveline component separated by ‘/’.\n1.9.\nThe certification mark shall be visible when the transmission, torque converter, other torque transferring component or additional driveline component is installed on the vehicle and shall be affixed to a part necessary for normal operation and not normally requiring replacement during component life.\n1.10\nIn the case that torque converter or other torque transferring components are constructed in such a way that they are not accessible and / or visible after being assembled with a transmission the certification mark of the torque converter or other torque transferring component shall be placed on the transmission.\nIn the case described in first paragraph, if a torque converter or other torque transferring component have not been certified, ‘–’ instead of the certification number shall be indicated on the transmission next to the alphabetical character specified in point 1.4.\n2.\nNumbering\n2.1.\nCertification number for transmissions, torque converter, other torque transferring component and additional driveline component shall comprise the following:\ng11*YYYY/YYYY*ZZZZ/ZZZZ*X*0000*00\nSection 1\nSection 2\nSection 3\nAdditional letter to Section 3\nSection 4\nSection 5\nIndication of country issuing the certificate\nHDV CO 2 certification Regulation (2017/2400)\nLatest amending Statutory Instrument (S.I. ZZZZ/ZZZZ)\nSee Table 1 of this appendix\nBase certification number 0000\nExtension 00",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Substituted by Commission Regulation (EU) 2019/318 of 19 February 2019 amending Regulation (EU) 2017/2400 and Directive 2007/46/EC of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F2",
      "text": "Annex 6 Appendix 7 point 1.3 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 83(5)(e)(i)"
    },
    {
      "type": "F",
      "label": "F3",
      "text": "Words in Annex 6 Appendix 7 point 1.4 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 83(5)(e)(ii)"
    },
    {
      "type": "F",
      "label": "F4",
      "text": "Image in Annex 6 Appendix 7 point 1.5 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 83(5)(e)(iii)(aa)"
    },
    {
      "type": "F",
      "label": "F5",
      "text": "Words in Annex 6 Appendix 7 point 1.5 omitted (31.12.2022 at 11.00 p.m.) by virtue of The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 83(5)(e)(iii)(bb)"
    },
    {
      "type": "F",
      "label": "F6",
      "text": "Word in Annex 6 Appendix 7 point 2.1 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 83(5)(e)(iv)"
    },
    {
      "type": "F",
      "label": "F7",
      "text": "Words in Annex 6 Appendix 7 table substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 83(5)(e)(v)"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2017/2400/annex/VI/appendix/7",
    "retrieved_at": "2026-11-01T14:44:20.922900+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}