# Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (Text with EEA relevance), Division 3.1.2.5.5: Oil level and conditioning

Extent: E+W+S+N.I.

The oil level shall meet the nominal specifications for the transmission.
If an external oil conditioning system is used, the oil inside the transmission shall be kept to the specified volume that corresponds to the specified oil level.
To guarantee that the external oil conditioning system is not influencing the test, one test point shall be measured with the conditioning system both on and off. The deviation between the two measurements of the torque loss (= input torque) shall be less than 5 %. The test point is specified as follows:
(1)gear = highest indirect gear,
(2)input speed = 1 600 rpm,
(3)temperatures as specified under 3.1.2.5.
For transmissions with hydraulic pressure control or a smart lubrication system, the measurement of torque independent losses shall be performed with two different settings: first with the transmission system pressure set to at least the minimum value for conditions with engaged gear and a second time with the maximum possible hydraulic pressure (see 3.1.6.3.1).

---
Source: https://www.legislation.gov.uk/eur/2017/2400/annex/VI/division/3/division/3.1/division/3.1.2/division/3.1.2.5/division/3.1.2.5.5 (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-2400/annex-VI/division-3/division-3.1/division-3.1.2/division-3.1.2.5/division-3.1.2.5.5
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

