{
  "url": "https://openlegislation.uk/eu-regulation-2017-2400/annex-VI/division-3/division-3.3/division-3.3.2/division-3.3.2.1",
  "json_url": "https://openlegislation.uk/eu-regulation-2017-2400/annex-VI/division-3/division-3.3/division-3.3.2/division-3.3.2.1.json",
  "legislation": "eur/2017/2400",
  "legislation_title": "Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2017-2400",
  "path": "annex/VI/division/3/division/3.3/division/3.3.2/division/3.3.2.1",
  "kind": "division",
  "number": "3.3.2.1",
  "heading": "Pre-conditioning",
  "text": "As specified for Option 1 in 3.1.2.4. with an exception for the following:\nThe pre-conditioning shall be performed on the direct drive gear without applied torque to the output shaft or target torque on the output shaft set to zero. If the transmission is not equipped with a direct drive gear, the gear with the ratio closest to 1:1 shall be used.\nor\nThe requirements as specified in 3.1.2.4. shall apply, with an exception for the following:\nThe pre-conditioning shall be performed on the direct drive gear without applied torque to the output shaft or the torque on the output shaft being within +/- 50 Nm. If the transmission is not equipped with a direct drive gear, the gear with the ratio closest to 1:1 shall be used.\nor, if the test rig includes a (master friction) clutch at the input shaft:\nThe requirements as specified in 3.1.2.4. shall apply, with an exception for the following:\nThe pre-conditioning shall be performed on the direct drive gear without applied torque to the output shaft or without applied torque to the input shaft. If the transmission is not equipped with a direct drive gear, the gear with the ratio closest to 1:1 shall be used.\nThe transmission would then be driven from the output side. Those proposals could also be combined.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2017/2400/annex/VI/division/3/division/3.3/division/3.3.2/division/3.3.2.1",
    "retrieved_at": "2026-11-01T14:44:20.922900+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}