# Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (Text with EEA relevance), Division 5.1.6.2.2.4

Extent: E+W+S+N.I.

The manufacturer may separate the retarder losses from the total transmission losses by testing in the order as described below:
(1)The load-independent torque loss for the complete transmission including retarder shall be measured as defined in point 3.1. for transmission testing in one of the higher transmission gears:
= T l,in,withret
(2)The retarder and related parts shall be replaced with parts required for the equivalent transmission variant without retarder. The measurement of point (1) shall be repeated.
= Tl,in,withoutret
(3)The load-independent torque loss for the retarder system shall be determined by calculating the differences between the two test data sets
= Tl,in,retsys = Tl,in,withret – Tl,in,withoutret

---
Source: https://www.legislation.gov.uk/eur/2017/2400/annex/VI/division/5/division/5.1/division/5.1.6/division/5.1.6.2/division/3/division/5.1.6.2.2.4 (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-2400/annex-VI/division-5/division-5.1/division-5.1.6/division-5.1.6.2/division-3/division-5.1.6.2.2.4
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

