# Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (Text with EEA relevance), Division 6.1.1: Case A: Measurement on a separate angle drive

Extent: E+W+S+N.I.

For the torque loss measurement of a separate angle drive, the three options as defined for the determination of the transmission losses shall apply:
Option 1Measured torque independent losses and calculated torque dependent losses (Transmission test option 1)
Option 2Measured torque independent losses and measured torque dependent losses at full load (Transmission test option 2)
Option 3Measurement under full load points (Transmission test option 3)
The measurement of the angle drive losses shall follow the procedure described for the related transmission test option in paragraph 3 diverging in the following requirements:

---
Source: https://www.legislation.gov.uk/eur/2017/2400/annex/VI/division/6/division/6.1/division/6.1.1 (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-2400/annex-VI/division-6/division-6.1/division-6.1.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.