# Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (Text with EEA relevance), Division 6.1.2.1

Extent: E+W+S+N.I.

The manufacturer may separate the angle drive losses from the total transmission losses by testing in the order as described below:
(1)The torque loss for the complete transmission including angle drive shall be measured as defined for the applicable transmission testing option
= Tl,in,withad
(2)The angle drive and related parts shall be replaced with parts required for the equivalent transmission variant without angle drive. The measurement of point (1) shall be repeated.
= Tl,in,withoutad
(3)The torque loss for the angle drive system shall be determined by calculating the differences between the two test data sets
= Tl,in,adsys = Tl,in,withad – Tl,in,withoutad

---
Source: https://www.legislation.gov.uk/eur/2017/2400/annex/VI/division/6/division/6.1/division/6.1.2/division/6.1.2.1 (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-2400/annex-VI/division-6/division-6.1/division-6.1.2/division-6.1.2.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

