# Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (Text with EEA relevance), Appendix 2

Extent: E+W+S+N.I.

Axle information document
Information document no.:
Issue:
Date of issue:
Date of Amendment:
pursuant to …
Axle type/family (if applicable):
…
0.
GENERAL
0.1
Name and address of manufacturer
0.2
Make (trade name of manufacturer):
0.3
Axle type:
0.4
Axle family (if applicable):
0.5
Axle type as separate technical unit / Axle family as separate technical unit
0.6
Commercial name(s) (if available):
0.7
Means of identification of type, if marked on the axle:
0.8
In the case of components and separate technical units, location and method of affixing of the certification mark:
0.9
Name(s) and address(es) of assembly plant(s):
0.10
Name and address of the manufacturer's representative:
PART 1
ESSENTIAL CHARACTERISTICS OF THE (PARENT) AXLE AND THE AXLE TYPES WITHIN AN AXLE FAMILY
Parent axle
Family member
or axle type
#1
#2
#3
0.0
GENERAL
0.1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.8.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.9.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.0
SPECIFIC AXLE INFORMATION
1.1
Axle line (SR, HR, SP, SRT, HRT)
…
…
…
…
1.2
Axle gear ratio
…
…
…
…
1.3
Axle housing (number/ID/drawing)
…
…
…
…
1.4
Gear specifications
…
…
…
1.4.1
Crown wheel diameter; [mm]
…
…
1.4.2
Vertical offset pinion/crown wheel; [mm]
…
1.4.3
Pinion angle with respect to horizontal plane; [°]
1.4.4
For portal axles only:
Angle between pinion axle and crown wheel axle; [°]
1.4.5
Teeth number of pinion
1.4.6
Teeth number of crown gear
1.4.7
Horizontal offset of pinion; [mm]
1.4.8
Horizontal offset of crown wheel; [mm]
1.5
Oil volume; [cm3]
1.6
Oil level; [mm]
1.7
Oil specification
1.8
Bearing type (number/ID/drawing)
1.9
Seal type (main diameter, lip number); [mm]
1.10.
Wheel ends (number/ID/drawing)
1.10.1
Bearing type (number/ID/drawing)
1.10.2
Seal type (main diameter, lip number); [mm]
1.10.3
Grease type
1.11.
Number of planetary/spur gears
1.12
Smallest width of planetary/spur gears; [mm]
1.13
Gear ratio of hub reduction
LIST OF ATTACHMENTS
No.:
Description:
Date of issue:
1
…
…
2
…

---
Source: https://www.legislation.gov.uk/eur/2017/2400/annex/VII/appendix/2 (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-2400/annex-VII/appendix-2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.