# Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (Text with EEA relevance), Appendix 6

Extent: E+W+S+N.I.

Input parameters for the simulation tool
Introduction
This Appendix describes the list of parameters to be provided by the component manufacturer as input to the simulation tool. The applicable XML schema as well as example data are available at the dedicated electronic distribution platform.
Definitions
(1) ‘Parameter ID’: Unique identifier as used in the simulation tool for a specific input parameter or set of input data
(2) ‘Type’: Data type of the parameter
string … sequence of characters in ISO8859-1 encoding
token … sequence of characters in ISO8859-1 encoding, no leading/trailing whitespace
date … date and time in UTC time in the format: YYYY-MM-DD T HH:MM:SS Z with italic letters denoting fixed characters e.g. ‘2002-05-30T09:30:10Z’
integer … value with an integral data type, no leading zeros, e.g. ‘1800’
double, X … fractional number with exactly X digits after the decimal sign (‘.’) and no leading zeros e.g. for ‘double, 2’: ‘2345.67’; for ‘double, 4’: ‘45.6780’
(3) ‘Unit’ … physical unit of the parameter
Set of input parameters
Table 1
Input parameters ‘Axlegear/General’
Parameter name
Param ID
Type
Unit
Description/Reference
Manufacturer
P215
token
[-]
Model
P216
token
[-]
CertificationNumber
P217
token
[-]
Date
P218
dateTime
[-]
Date and time when the component-hash is created
AppVersion
P219
token
[-]
LineType
P253
string
[-]
Allowed values: ‘Single reduction axle’, ‘Single portal axle’, ‘Hub reduction axle’, ‘Single reduction tandem axle’, ‘Hub reduction tandem axle’
Ratio
P150
double, 3
[-]
CertificationMethod
P256
string
[-]
Allowed values: ‘Measured’, ‘Standard values’
Table 2
Input parameters ‘Axlegear/LossMap’ for each grid point in the loss map
Parameter name
Param ID
Type
Unit
Description/Reference
InputSpeed
P151
double, 2
[1/min]
InputTorque
P152
double, 2
[Nm]
TorqueLoss
P153
double, 2
[Nm]

---
Source: https://www.legislation.gov.uk/eur/2017/2400/annex/VII/appendix/6 (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-2400/annex-VII/appendix-6
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.