# Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (Text with EEA relevance), Division 6.2.2

Extent: E+W+S+N.I.

For four control areas one point shall be selected, measured and evaluated according to the full procedure as described in section 4.4. Each control point shall be selected in the following manner:
(i) The control areas shall be selected depending on the axle line:
SR axles including tandem combinations: Control areas 5, 6, 8 and 9
HR axles including tandem combinations: Control areas 2, 3, 4 and 5
(ii) The selected point shall be located in the centre of the area referring to the speed range and the applicable torque range for the according speed.
(iii) In order to have a corresponding point for comparison with the loss map measured for certification, the selected point shall be moved to the closest measured point from the approved map.

---
Source: https://www.legislation.gov.uk/eur/2017/2400/annex/VII/division/6/division/6.2/division/6.2.2 (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-2400/annex-VII/division-6/division-6.2/division-6.2.2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.