# Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (Text with EEA relevance), Appendix 8

Extent: E+W+S+N.I.

Markings
In the case of a vehicle being type approved accordant to this Annex, the cabin shall bear:
1.1.The manufacturer's name or trade mark
1.2The make and identifying type indication as recorded in the information referred to in paragraph 0.2 and 0.3 of Appendix 2 to this Annex
1.3The certification mark as a rectangle surrounding the lower-case letter ‘g’ followed by the number 11.
1.4The certification mark shall also include in the vicinity of the rectangle the ‘base certification number’ as specified for Section 4 of the type-approval number set out in point 2.4 of Annex IV to Commission Implementing Regulation (EU) 2020/683 , preceded by the two figures indicating the sequence number assigned to the latest technical amendment to this Regulation and by a character ‘P’ indicating that the approval has been granted for an air drag.
For this Regulation, the sequence number shall be 00.
1.4.1
Example and dimensions of the certification mark
The above certification mark affixed to a cabin shows that the type concerned has been approved ... pursuant to this Regulation. The first two digits (00) are indicating the sequence number assigned to the latest technical amendment to this Regulation. The following letter indicates that the certificate was granted for an air drag (P). The last four digits (0004) are those allocated by the type-approval authority to the engine as the base certification number.
1.5The certification mark shall be affixed to the cabin in such a way as to be indelible and clearly legible. It shall be visible when the cabin is installed on the vehicle and shall be affixed to a part necessary for normal cabin operation and not normally requiring replacement during cabin life. The markings, labels, plates or stickers must be durable for the useful life of the cabin and must be clearly legible and indelible. The manufacturer shall ensure that the markings, labels, plates or sticker cannot be removed without destroying or defacing them.
2
Numbering
2.1.
Certification number for air drag shall comprise the following:
g11*YYYY/YYYY*ZZZZ/ZZZZ*P*0000*00
Section 1
Section 2
Section 3
Additional letter to section 3
Section 4
Section 5
Indication of country issuing the certificate
HDV CO 2 certification Regulation (2017/2400)
Latest amending Statutory Instrument (S.I. ZZZZ/ZZZZ)
P = Air drag
Base certification number 0000
Extension 00

---
Source: https://www.legislation.gov.uk/eur/2017/2400/annex/VIII/appendix/8 (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-2400/annex-VIII/appendix-8
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.