# Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (Text with EEA relevance), Division 6.1.5.4: Zeroing of the torque measurement equipment

Extent: E+W+S+N.I.

Zeroing of the torque measurement equipment shall follow the instruction of the equipment maker. It shall be ensured for zeroing, that the torque on the driven axle is zero. For zeroing, the vehicle shall be stopped directly after the warm up phase and zeroing shall be performed directly after the vehicle stop to minimise cool down effects. Zeroing shall be finished within less than 20 minutes.

---
Source: https://www.legislation.gov.uk/eur/2017/2400/annex/Xa/division/6/division/6.1/division/6.1.5/division/6.1.5.4 (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-2400/annex-Xa/division-6/division-6.1/division-6.1.5/division-6.1.5.4
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

