# Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (Text with EEA relevance), Division 6.1.5.7: Boundary conditions for the verification test

Extent: E+W+S+N.I.

The boundary conditions to be met for a valid verification test are set in Table 3.
If the vehicle passes the verification test in accordance with point 7, the test shall be set valid even if the following conditions are not met:
undercut of minimum values for parameter No 1, 2, 6, 9 in Table 3,
exceedance of maximum values for parameter No 3, 4, 5, 7, 8, 10, 12 in Table 3.
Table 3
Parameters for a valid verification test
Or maximum vehicle speed if lower than 70 km/h
No
Parameter
Min.
Max.
Applicable for
1
Warm up [minutes]
60
2
Average velocity at warm up [km/h]
70
100
3
Fuel consumption measurement duration [minutes]
80
120
4
Distance based share urban driving
2 %
8 %
vehicle groups 4, 5, 9, 10
5
Distance based share rural driving
7 %
13 %
6
Distance based share motorway driving
74 %
—
vehicle groups 4, 5, 9, 10
7
Time share of idling at stand still
5 %
8
Average ambient temperature
5 °C
30 °C
9
Road condition dry
100 %
10
Road condition snow or ice
0 %
11
Seal level of the route [m]
0
800
12
Duration of continuous idling at stand still [minutes]
3
In case of extraordinary traffic conditions, the verification test shall be repeated.

---
Source: https://www.legislation.gov.uk/eur/2017/2400/annex/Xa/division/6/division/6.1/division/6.1.5/division/6.1.5.7 (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-2400/annex-Xa/division-6/division-6.1/division-6.1.5/division-6.1.5.7
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

