# Commission Delegated Regulation (EU) 2017/654 of 19 December 2016 supplementing Regulation (EU) 2016/1628 of the European Parliament and of the Council with regard to technical and general requirements relating to emission limits and type-approval for internal combustion engines for non-road mobile machinery, Division 3.2.6.1.1

Extent: E+W+S+N.I.

Notwithstanding point 3.2.6.1, for PN, either an additive DF of 0,0 or a multiplicative DF of 1,0 may be used, in conjunction with the results of previous DF testing that did not establish a value for PN if both of the following conditions are fulfilled:
(a) the previous DF test was conducted on engine technology that would have qualified for inclusion in the same engine after-treatment system family, as set out in point 3.1.2, as the engine family to which it is intended to apply the DFs; and,
(b) the test results were used in a previous type-approval granted before the applicable EU type-approval date given in Annex III to Regulation (EU) 2016/1628.

---
Source: https://www.legislation.gov.uk/eur/2017/654/annex/III/division/3/division/3.2/division/3.2.6/division/3.2.6.1/division/3.2.6.1.1 (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-654/annex-III/division-3/division-3.2/division-3.2.6/division-3.2.6.1/division-3.2.6.1.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

