OpenLegislation

Division 5.2.5.1.3 Use of an adjusted MTS

United Kingdom

Original text. Later amendments are not shown.

If the falling part of the full load curve has a very steep edge, this may cause problems to drive the 105 % speeds of the NRTC correctly. In this case it is allowed, with prior agreement of the technical service, to use an alternative value of MTS determined using one of the following methods:

  1. (a)

    the MTS may be slightly reduced (maximum 3 %) in order to make correct driving of the NRTC possible.

  2. (b)

    Calculate an alternative MTS by means of equation (6-4):

    MTS = ((n max – n idle)/1,05) + n idle (6-4)

    where:

    n max
  3. is the engine speed at which the engine governor function controls engine speed with operator demand at maximum and with zero load applied (‘maximum no-load speed’)

  4. n idle
  5. is the idle speed