OpenLegislation

Division (b) Adjustment of engine torque due to auxiliaries fitted for the emissions test

United Kingdom

Original text. Later amendments are not shown.

Where auxiliaries are fitted in accordance with Appendix 2 there shall be no adjustment to the maximum torque for the respective test speed taken from the engine mapping performed according to point 7.6.2.

Where, according to points 6.3.2 or 6.3.3 necessary auxiliaries that should have been fitted for the test are not installed, or auxiliaries that should have been removed for the test are installed, the value of T max shall be adjusted by means of equation (6-17).

T max = T map – T AUX (6-17)

with:

TAUX = Tr – Tf (6-18)

where:

T map
  • is the unadjusted maximum torque for the respective test speed taken from the engine mapping performed in accordance with point 7.6.2

  • T f
  • is the torque required to drive auxiliaries that should have been fitted but were not installed for the test

  • Tr
  • is the torque required to drive auxiliaries that should have been removed for the test but were installed for the test

  • Notes on Division 7.7.2.3

    Textual amendments

    F1

    Substituted by Commission Delegated Regulation (EU) 2018/989 of 18 May 2018 amending and correcting Delegated Regulation (EU) 2017/654 supplementing Regulation (EU) 2016/1628 of the European Parliament and of the Council with regard to technical and general requirements relating to emission limits and type-approval for internal combustion engines for non-road mobile machinery (Text with EEA relevance).