# Commission Delegated Regulation (EU) 2017/654 of 19 December 2016 supplementing Regulation (EU) 2016/1628 of the European Parliament and of the Council with regard to technical and general requirements relating to emission limits and type-approval for internal combustion engines for non-road mobile machinery, Division 9.3.3.4.5: Filter holder

Extent: E+W+S+N.I.

To minimize turbulent deposition and to deposit PM evenly on a filter, a 12,5° (from centre) divergent cone angle to transition from the transfer-line inside diameter to the exposed diameter of the filter face shall be used. Stainless steel for this transition shall be used.

---
Source: https://www.legislation.gov.uk/eur/2017/654/annex/VI/division/9/division/9.3/division/9.3.3/division/9.3.3.4/division/9.3.3.4.5 (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-654/annex-VI/division-9/division-9.3/division-9.3.3/division-9.3.3.4/division-9.3.3.4.5
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

