Division 9.4.5.3.3 Exhaust gas cooling
United Kingdom
This point does not apply to cooling of the exhaust gas due to the design of the engine, including, but not limited to, water-cooled exhaust manifolds or turbochargers.
Exhaust gas cooling upstream of the flow meter is permitted with the following restrictions:
- (a)
PM shall not be sampled downstream of the cooling;
- (b)
If cooling causes exhaust gas temperatures above 475 K (202 °C) to decrease to below 453 K (180 °C), HC shall not be sampled downstream of the cooling;
- (c)
If cooling causes aqueous condensation, NOx shall not be sampled downstream of the cooling unless the cooler meets the performance verification in point 8.1.11.4;
- (d)
If cooling causes aqueous condensation before the flow reaches a flow meter, dew point T dew and pressure p total shall be measured at the flow meter inlet. These values shall be used in emission calculations in accordance with Annex VII.