# Commission Delegated Regulation (EU) 2017/654 of 19 December 2016 supplementing Regulation (EU) 2016/1628 of the European Parliament and of the Council with regard to technical and general requirements relating to emission limits and type-approval for internal combustion engines for non-road mobile machinery, Division 2.3.1.1.1: Calculation based on sample ratio

Extent: E+W+S+N.I.

The particulate emission over the cycle m PM [g] shall be calculated by means of equation (7-42):
m PM = m f r s × 1000
(7-42)
where:
m f particulate mass sampled over the cycle [mg]
r s average sample ratio over the test cycle [-]
with:
r s = m se m ew × m sep m sed
(7-43)
Where:
m se sample mass of raw exhaust gas over the cycle [kg]
m ew total mass of raw exhaust gas over the cycle [kg]
m sep mass of diluted exhaust gas passing the particulate collection filters [kg]
m sed mass of diluted exhaust gas passing the dilution tunnel [kg]
In case of the total sampling type system, m sep and m sed are identical.

---
Source: https://www.legislation.gov.uk/eur/2017/654/annex/VII/division/2/division/2.3/division/2.3.1/division/2.3.1.1/division/2.3.1.1.1 (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-654/annex-VII/division-2/division-2.3/division-2.3.1/division-2.3.1.1/division-2.3.1.1.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

