OpenLegislation

Division 2.4.2.1 Transient (NRTC and LSI-NRTC) test cycles and RMC

United Kingdom

Original text. Later amendments are not shown.

The particulate specific emissions shall be calculated with equation (7-61) where e gas [g/kWh] and m gas [g/test] are substituted by e PM [g/kWh] and m PM [g/test] respectively:

e PM = m PM W act (7-65)

where:

m PM

  • total mass of particulates emission, calculated in accordance with point 2.3.1.1 or 2.3.1.2 [g/test]

    • W act

  • cycle work [kWh]

    • The emissions on the transient composite cycle (i.e. cold-start NRTC and hot-start NRTC) shall be calculated as shown in point 2.4.1.1.