# Commission Delegated Regulation (EU) 2017/654 of 19 December 2016 supplementing Regulation (EU) 2016/1628 of the European Parliament and of the Council with regard to technical and general requirements relating to emission limits and type-approval for internal combustion engines for non-road mobile machinery, Division 3.8.2.1: Transient (NRTC and LSI-NRTC) test cycles and RMC

Extent: E+W+S+N.I.

The particulate specific emissions shall be calculated by transforming equation (7-128) into equation (7-132) where e gas [g/kWh] and m gas [g/test] are substituted by e PM [g/kWh] and m PM [g/test] respectively:
e PM = m PM W act
(7-132)
Where:
m PM total mass of particulates emission, calculated according to point 3.7.1 [g/test]
W act cycle work [kWh]
The emissions on the transient composite cycle (i.e. cold-start NRTC and hot-start NRTC) shall be calculated as shown in point 3.8.1.1.

---
Source: https://www.legislation.gov.uk/eur/2017/654/annex/VII/division/3/division/3.8/division/3.8.2/division/3.8.2.1 (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-654/annex-VII/division-3/division-3.8/division-3.8.2/division-3.8.2.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.