Appendix 8
United Kingdom
Test report for in-service monitoring
1.
Engine manufacturer information
1.1.
Make (trade name(s) of manufacturer)
1.2.
Company name and address of manufacturer
1.3.
Name and address of manufacturer's authorised representative (if any)
1.4.
Name(s) and address(es) of assembly/manufacture plant(s)
2.
Engine information
2.1.
Engine type/family designation
2.2.
Category and sub-category of the engine type/engine family
2.3.
Type approval number
2.4.
Commercial name(s) (if applicable)
2.5.
Engine identification number
2.6.
Engine production year and month
2.7.
Engine rebuilt
F12.8.
Engine total swept volume [cm 3 ]
2.9.
Number of cylinders
2.10.
Engine declared rated net power/rated speed [kW/rpm]
2.11.
Engine maximum net power/power speed [kW/rpm]
2.12.
Engine declared maximum torque/torque speed [kW/rpm]
2.13.
Idle speed [rpm]
2.14.
Manufacturer supplied full-load torque curve available (yes/no)
2.15.
Manufacturer supplied full-load torque curve reference number
2.16.
DeNOx system (e.g. EGR, SCR)
2.17.
Type of catalytic converter
2.18.
Type of particulate trap
2.19.
After-treatment modified with respect to type approval (yes/no)
2.20.
ECU information (Software calibration number)
3.
Non-road mobile machinery information
3.1.
Non-road mobile machinery owner
3.2.
Category(ies) of non-road mobile machinery
3.3.
Non-road mobile machinery manufacturer
3.4.
Non-road mobile machinery identification number
3.5.
Non-road mobile machinery registration number and country of registration (if available)
3.6.
Non-road mobile machinery commercial name(s) (if applicable)
3.7.
Non-road mobile machinery production year and month
4.
Engine/Non-road mobile machinery selection
4.1.
Non-road mobile machinery or engine location method
4.2.
Selection criteria for non-road mobile machinery, engines, in-service families
4.3.
Location where the tested non-road mobile machinery normally operates
4.4.
Operating hours at test start:
- 4.4.1.
Non-road mobile machinery [h]
- 4.4.2.
Engine [h]
5.
Portable emissions measurement system (PEMS)
5.1.
PEMS power supply: external/sourced from non-road mobile machinery
5.2.
Measurement instruments (PEMS) brand and type
5.3.
Measurement instruments (PEMS) calibration date
5.4.
Calculation software and version used (e.g. EMROAD 4.0)
5.5.
Location of ambient conditions sensors
6.
Test conditions
6.1.
Date and time of test
6.2.
Test duration [s]
6.3.
Test Location
6.4.
General weather and ambient conditions (e.g. temperature, humidity, altitude)
6.4.1.
Average ambient conditions (as calculated from the instantaneous measured data)
6.5.
Hours operated per non-road mobile machinery/engine
6.6.
Detailed information on non-road mobile machinery's actual operation
6.7.
Test fuel specifications
6.8.
Lubrication oil specifications
6.9.
Reagent specifications (if applicable)
6.10.
Brief description of the work performed
7.
Average concentration of gaseous pollutant emissions
7.1.
Average HC concentration [ppm] [Not mandatory]
7.2.
Average CO concentration [ppm] [Not mandatory]
7.3.
Average NOx concentration [ppm] [Not mandatory]
7.4.
Average CO2 concentration [ppm] [Not mandatory]
7.5.
Average Exhaust mass flow [kg/h] [Not mandatory]
7.6.
Average Exhaust temperature [°C] [Not mandatory]
8.
Integrated mass of gaseous pollutant emissions
8.1.
THC emissions [g]
8.2.
CO emissions [g]
8.3.
NOx emissions [g]
8.4.
CO2 emissions [g]
9.
Averaging window f1 conformity factors (calculated in accordance with Appendices 2 to 5)
(Minimum, maximum and 90th cumulative percentile)
9.1.
Work averaging window THC conformity factor [-]
9.2.
Work averaging window CO conformity factor [-]
9.3.
Work averaging window NOx conformity factor [-]
9.4.
CO2 mass averaging window THC conformity factor [-]
9.5.
CO2 mass averaging window CO conformity factor [-]
9.6.
CO2 mass averaging window NOx conformity factor [-]
9.7.
Work averaging window: minimum and maximum averaging window power [%]
9.8.
CO2 mass averaging window: minimum and maximum averaging window duration [s]
9.9.
Work averaging window: percentage of valid averaging windows
9.10.
CO2 mass averaging window: percentage of valid averaging windows
9.11.
CO2 emissions
10.
Averaging window conformity factors (calculated in accordance with Appendices 2, 3 and 5 without the determination of valid data in accordance with Appendix 4 and without the determination of valid windows as set out in points 2.2.2 and 2.3.1 of Appendix 5)
(Minimum, maximum and 90th cumulative percentile)
10.1.
Work averaging window THC conformity factor [-]
10.2.
Work averaging window CO conformity factor [-]
10.3.
Work averaging window NOx conformity factor [-]
10.4.
CO2 mass averaging window THC conformity factor [-]
10.5.
CO2 mass averaging window CO conformity factor [-]
10.6.
CO2 mass averaging window NOx conformity factor [-]
10.7.
Work averaging window: minimum and maximum averaging window power [%]
10.8.
CO2 mass averaging window: minimum and maximum averaging window duration [s]
11.
Test results verification
11.1.
THC analyser zero, span and audit results, pre and post test
11.2.
CO analyser zero, span and audit results, pre and post test
11.3.
NOx analyser zero-span and audit results, pre and post test
11.4.
CO2 analyser zero, span and audit results, pre and post test
11.5.
Data consistency check results, according to Section 4 of Appendix 3
I-1.
Instantaneous measured data
I-1.1.
THC concentration [ppm]
I-1.2.
CO concentration [ppm]
I-1.3.
NOx concentration [ppm]
I-1.4.
CO2 concentration [ppm]
I-1.5.
Exhaust mass flow [kg/h]
I-1.6.
Exhaust temperature [°C]
I-1.7.
Ambient air temperature [°C]
I-1.8.
Ambient pressure [kPa]
I-1.9.
Ambient humidity [g/kg] [Not mandatory]
I-1.10.
Engine torque [Nm]
I-1.11.
Engine speed [rpm]
I-1.12.
Engine fuel flow [g/s]
I-1.13.
Engine coolant temperature [°C]
I-1.14.
Non-road mobile machinery latitude [degree]
I-1.15.
Non-road mobile machinery longitude [degree]
I-2.
Instantaneous calculated data
I-2.1.
THC mass [g/s]
I-2.2.
CO mass [g/s]
I-2.3.
NOx mass [g/s]
I-2.4.
CO2 mass [g/s]
I-2.5.
THC cumulated mass [g]
I-2.6.
CO cumulated mass [g]
I-2.7.
NOx cumulated mass [g]
I-2.8.
CO2 cumulated mass [g]
I-2.9.
Calculated fuel rate[g/s]
I-2.10.
Engine power [kW]
I-2.11.
Engine work [kWh]
I-2.12.
Work averaging window duration [s]
I-2.13.
Work averaging window average engine power [%]
I-2.14.
Work averaging window THC conformity factor [-]
I-2.15.
Work averaging window CO conformity factor [-]
I-2.16.
Work averaging window NOx conformity factor [-]
I-2.17.
CO2 mass averaging window duration [s]
I-2.18.
CO2 mass averaging window THC conformity factor [-]
I-2.19.
CO2 mass averaging window CO conformity factor [-]
I-2.20.
CO2 mass averaging window NOx conformity factor [-]
Annotations
Textual amendments
Footnotes
- f1
-
Averaging window is the sub-set of the complete calculated data set during the in-service monitoring test whose CO2 mass or work is equal to the engine CO2 mass or work measured over the reference laboratory Non-Road Transient Cycle (NRTC).