Division 2.4.5

Verify each of the following items:

1. (a)

   Verify that an MSD was received by the PSAP test point. This shall be verified by a record of the PSAP test point showing that an MSD emitted from the eCall system following the trigger was received and successfully decoded. If the MSD decoding failed at redundancy version MSD rv0 but was successful at a higher redundancy version or in robust modulator mode, as defined in ETSI/TS 126 267, this is acceptable.

2. (b)

   Verify that the MSD contained an up-to-date timestamp. This shall be verified by a test record showing that the timestamp contained in the MSD received by the PSAP test point does not deviate from the exact recorded time of the trigger activation by more than 60 seconds. The transmission may be repeated if the eCall system failed to achieve a GNSS position fix before the test.

3. (c)

   Verify that the MSD contained an accurate, up-to-date location. This shall be verified in accordance with the Vehicle Location Test Procedure as defined in point 2.5 by a test record showing that the deviation between IVS location and true location, d_IVS, is less than 150 metres and the confidence bit transmitted to the PSAP test point indicates 'position can be trusted'.