OpenLegislation

Division 2.1.6

United Kingdom

Original text. Later amendments are not shown.

Tests of the eCall in respect of its GNSS receiver shall be performed with the test and auxiliary equipment specified in Table 1.

Table 1

Recommended list of measurement instruments, test and auxiliary equipment

Note: it is allowed to apply other similar types of equipment providing determination of characteristics with the required accuracy.

Equipment nameRequired technical characteristics of test equipment
Scale rangeScale accuracy
Global navigation satellite system simulator of Galileo and GPS signalsNumber of simulated signals: at least 12

Mean square deviation of random accuracy component of pseudo-range to Galileo and GPS satellites not more than:

  • stadiometric code phase: 0,1 metres;

  • communication carrier phase: 0,001 metres;

  • pseudovelocity: 0,005 metres/second.

Digital stopwatchMaximum count volume: 9 hours 59 minutes 59,99 seconds

Daily variation at 25 (± 5) °С not more than 1,0 seconds.

Time discreteness 0,01 seconds.

Vector network analyser

Frequency range: 300 kHz .. 4 000 kHz

Dynamic range:

(minus 85 .. 40) dB

Accuracy F = ± 1·10– 6 kHz

Accuracy D = (0,1 .. 0,5) dB

Low-noise amplifier

Frequency range: 1 200 .. 1 700 MHz

Noise coefficient: not more 2,0 dB

Amplifier gain coefficient: 24 dB

Attenuator 1Dynamic range: (0 .. 11) dBAccuracy ± 0,5 dB
Attenuator 2Dynamic range: (0 .. 110) dBAccuracy ± 0,5 dB
Power sourceRange of direct current voltage setting: from 0,1 to 30 voltsAccuracy V = ± 3 %
Current intensity of output voltage: at least 3 amperesAccuracy A = ± 1 %

Notes on the whole EU Regulation

Textual amendments

F1

Words in Regulation title substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 79(2)