# Commission Delegated Regulation (EU) 2017/79 of 12 September 2016 establishing detailed technical requirements and test procedures for the GB type-approval of motor vehicles with respect to their 112-based eCall in-vehicles systems, of 112-based eCall in-vehicle separate technical units and components and supplementing and amending Regulation (EU) 2015/758 of the European Parliament and of the Council with regard to the exemptions and applicable standards (Text with EEA relevance), Article 6: Requirements and test procedures for GB type-approval of 112-based eCall in-vehicle system components

Extent: E+W+S+N.I.

1. GB type-approval of a 112-based eCall in-vehicle system component shall be subject to the component passing the tests laid down in Annex I and complying with the relevant requirements in that Annex.
2. For the purposes of paragraph 1, only the verification procedure for components laid down in point 2.8 of Annex I shall apply after the individual parts are subjected to the test referred to in point 2.3 of this Annex.
3. Upon request of the manufacturer, a component may additionally be tested by the technical service for compliance with the requirements set out in Annexes IV, VI and VII that are relevant to the functionalities of the component. Compliance with those requirements shall be indicated on the type-approval certificate issued in accordance with Article 3(3) of Commission Implementing Regulation (EU) 2017/78.

---
Source: https://www.legislation.gov.uk/eur/2017/79/article/6 (the official version)
Page: https://openlegislation.uk/eu-regulation-2017-79/article-6
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.