# Commission Implementing Regulation (EU) 2018/1602 of 11 October 2018 amending Annex I to Council Regulation (EEC) No 2658/87 on the tariff and statistical nomenclature and on the Common Customs Tariff, Division 2: For the purposes of subheadings 7606 12 11 and 7606 12 19, the following terms shall have the meaning hereby assigned to them:

Extent: E+W+S+N.I.

‘beverage can body stock’: sheets or strips in coils, rolled, having manganese as the predominant alloy element and having a minimum tensile strength of 262 MPa. The sheets or strips have a uniform solid cross-section along their whole length, are of a width of 300 mm or more but not more than 2 000 mm, of a thickness exceeding 0,2 mm but not exceeding 0,4 mm, and of a length always superior to the width and to the thickness. Beverage can body stock is prelubricated, with a bright surface;
‘beverage can end stock and tab stock’: sheets or strips in coils, having magnesium as the predominant alloy element and having a minimum tensile strength of 345 MPa. The sheets or strips have a uniform solid cross-section along their whole length, are of a width of 30 mm or more but not more than 2 000 mm, of a thickness exceeding 0,2 mm but not exceeding 0,35 mm, and of a length always superior to the width and to the thickness. Beverage can end stock is varnished on both sides. Beverage can tab stock is degreased and oiled.

---
Source: https://www.legislation.gov.uk/eur/2018/1602/annex/I/part/TWO/division/1/section/XV/chapter/76/annotations/3/annotation/2 (the official version)
Page: https://openlegislation.uk/eu-regulation-2018-1602/annex-I/part-TWO/division-1/section-XV/chapter-76/annotations/3/annotation/2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.