# Commission Implementing Regulation (EU) 2018/1853 of 27 November 2018 granting a Union authorisation for the biocidal product family Teat disinfectants biocidal product family of CVAS (Text with EEA relevance), Division 4.2.1: Use-specific instructions for use

Extent: E+W+S+N.I.

The product must be brought to a temperature above 20 °C before use.
Open a can containing the RTU product and insert a suction tube of the automated dipping-system. Avoid discharge of surplus fluids.
After milking, the vacuum is shut off and the teat dip is injected into a manifold on the clawpiece. The teats are coated with ca. 5 mL of dip when the teat cup is withdrawn by the Automatic Cluster Removal (ACR). After the removal of the ACR, every liner of the automated dipping-system is thoroughly rinsed with water and blown out with compressed air.
In a final cleaning step after each milking session of the herd, the liners are disinfected (e.g. with a chlorine-based product) and blown out again with compressed air.
Leave the product on the teats until next milking. Keep the animals standing for at least 5 minutes after treatment.
Afterwards, the milking system is ready for the next milking event.
The whole process is automated.

---
Source: https://www.legislation.gov.uk/eur/2018/1853/annex/part/II/division/2/division/4/division/4.2/division/4.2.1 (the official version)
Page: https://openlegislation.uk/eu-regulation-2018-1853/annex/part-II/division-2/division-4/division-4.2/division-4.2.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.