Division 4.2.1 Use-specific instructions for use

The product must be brought to a temperature above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended.

Fill the reservoir with the RTU product assuming 5 mL product per cow and screw the top of the trigger sprayer on it. Avoid discharge of surplus fluids.

Clean the teats carefully by wiping with a single service paper towel/cloth immediately before milking.

After milking, spray the disinfectant on the teats using the trigger sprayer making sure that about 3 cm of the teat around the streak canal are covered with the disinfectant.

Refill the reservoir of the trigger sprayer with fresh disinfectant as needed.

Leave the product on the teats until next milking. Keep the animals standing for at least 5 minutes after treatment.

After disinfection, empty the reservoir and clean reservoir and trigger sprayer by rinsing with water.