# Commission Implementing Regulation (EU) 2018/1853 of 27 November 2018 granting a Union authorisation for the biocidal product family Teat disinfectants biocidal product family of CVAS (Text with EEA relevance), Division 4.2.1: Use-specific instructions for use

Extent: E+W+S+N.I.

The product must be brought to a temperature above 20 °C before use.
The use of a dosing pump for filling the product into the application equipment is recommended.
Fill the reservoir with the RTU product assuming 5 mL product per cow and screw the foam cup on top. Avoid discharge of surplus fluids.
Clean the teats carefully by wiping with a single service paper towel/cloth immediately before milking.
After milking, squeeze the reservoir and put the foam cup over each teat from below making sure that about 3 cm of the teat are immersed into the disinfectant.
Refill the cup of the foaming unit with fresh disinfectant by squeezing the reservoir as needed. Refill the reservoir with fresh disinfectant as needed.
Leave the product on the teats until next milking. Keep the animals standing for at least 5 minutes after treatment.
After disinfection, empty the reservoir and clean reservoir and foam cup by rinsing with water.

---
Source: https://www.legislation.gov.uk/eur/2018/1853/annex/part/II/division/9/division/4/division/4.2/division/4.2.1 (the official version)
Page: https://openlegislation.uk/eu-regulation-2018-1853/annex/part-II/division-9/division-4/division-4.2/division-4.2.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.