Division 4.4.1 Use-specific instructions for use

The product must be brought to a temperature above 20 °C before use.

Open a can containing the RTU product assuming 5 mL product per cow and insert a sucking lance of the electronic sprayer. Avoid discharge of surplus fluids.

Clean carefully the teats by wiping with a single service paper towel/cloth before milking.

After milking, spray the disinfectant on the teats using the electronic sprayer making sure that about 3 cm of the teat around the streak canal are covered with the disinfectant.

Replace the empty can by a new can containing the RTU product as needed.

Leave the product on the teats until next milking. Keep the animals standing for at least 5 minutes after treatment.

After disinfection, put the sucking lance system into a bucket of water and rinse the sprayer by pumping the water through the sprayer.