# Council Regulation (EU) 2018/2070 of 20 December 2018 amending Regulation (EU) No 1388/2013 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products

EU Regulation 2018/2070 · adopted 20 December 2018

Council Regulation (EU) 2018/2070 of 20 December 2018 amending Regulation (EU) No 1388/2013 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products

PDFs: Printed copy https://openlegislation.uk/eu-regulation-2018-2070/pdf/eur_20182070_adopted_en.pdf

## Introductory text

Council Regulation (EU) 2018/2070
of 20 December 2018
amending Regulation (EU) No 1388/2013 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,
Having regard to the proposal from the European Commission,
Whereas:
(1)
In order to ensure the sufficient and uninterrupted supply of certain goods insufficiently produced in the Union and to avoid disturbances on the market for certain agricultural and industrial products, autonomous tariff quotas were opened by Council Regulation (EU) No 1388/2013. Products within those tariff quotas can be imported into the Union at reduced or zero duty rates.
(2)
For those reasons, it is necessary to open, with effect from 1 January 2019, six new tariff quotas with order numbers 09.2600, 09.2617, 09.2720, 09.2738, 09.2740 and 09.2742 at zero duty rates for appropriate volumes of those products. For the two new tariff quotas with order numbers 09.2740 and 09.2742, it is in the interest of the Union to open those tariff quotas only for the purposes of using the products concerned for the manufacture of specific goods produced in the Union. The application of those two tariff quotas should therefore be made conditional on the specific use of the products in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council.
(3)
In the case of four tariff quotas with order numbers 09.2684, 09.2686, 09.2723 and 09.2864, the quota volumes should be increased, as an increase is in the interest of the Union.
(4)
For one tariff quota with order number 09.2850, the classification in the Combined Nomenclature (CN) of the products covered by that tariff quota should be amended.
(5)
The classification in the CN of the products currently covered by the tariff quota with order number 09.2844 has been clarified. For the sake of clarity and legal certainty, that tariff quota should be replaced by a new tariff quota with order number 09.2820, indicating the applicable CN code.
(6)
In the case of five tariff quotas with order numbers 09.2684, 09.2728, 09.2730, 09.2734 and 09.2736, the quota period should be extended with effect from 1 January 2019, as those tariff quotas were opened for a period of six months only and it is still in the interest of the Union to maintain those tariff quotas.
(7)
As the scope of the five tariff quotas with order numbers 09.2620, 09.2668, 09.2736, 09.2850 and 09.2908 has become inadequate to fulfil the needs of the economic operators of the Union, the description of the products covered by those tariff quotas should be amended. For the two tariff quotas with order numbers 09.2668 and 09.2850, it is in the interest of the Union to maintain those tariff quotas only for the purposes of the incorporation of the products concerned into specific goods produced in the Union. The application of those two tariff quotas should therefore be made conditional on the specific use of the products in accordance with Article 254 of Regulation (EU) No 952/2013.
(8)
As it is no longer in the interest of the Union to maintain the seven tariff quotas with order numbers 09.2695, 09.2726, 09.2732, 09.2818, 09.2836, 09.2838 and 09.2886, they should be closed with effect from 1 January 2019.
(9)
In the interest of clarity, and taking into account the number of amendments to be made, the Annex to Regulation (EU) No 1388/2013 should be replaced.
(10)
Regulation (EU) No 1388/2013 should therefore be amended accordingly.
(11)
In order to avoid any interruption of the application of the tariff quota scheme and to comply with the guidelines set out in the communication from the Commission concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the tariff quotas for the products concerned have to apply from 1 January 2019. This Regulation should therefore enter into force as a matter of urgency,
HAS ADOPTED THIS REGULATION:

## 1 

The Annex to Regulation (EU) No 1388/2013 is replaced by the text set out in the Annex to this Regulation.

## 2 

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.
It shall apply from 1 January 2019.

## Signature

This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 20 December 2018.
For the Council
The President
E. Köstinger

## 

However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings.
Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1)
Only the ad valorem duty is suspended. The specific duty shall continue to apply.
Order number
CN code
TARIC
Description
Quota period
Quota volume
Quota duty
09.2637
ex 0710 40 00
20
Corn cobs (Zea Mays Saccharata) whether or not cut, with a diameter of 10 mm or more but not more than 20 mm, for use in the manufacture of products of the food industry for treatment other than simple repacking
1.1.-31.12.
550 tonnes
0 %
ex 2005 80 00
30
09.2849
ex 0710 80 69
10
Mushrooms of the species Auricularia polytricha (uncooked or cooked by steaming or boiling), frozen, for the manufacture of prepared meals
1.1.-31.12.
700 tonnes
0 %
09.2664
ex 2008 60 39
30
Sweet cherries containing added spirit, with a sugar content of not more than 9 % by weight, of a diameter of not more than 19,9 mm, with stones, for use in chocolate products
1.1.-31.12.
1 000 tonnes
10 %
09.2740
ex 2309 90 96
97
Soya bean protein concentrate containing by weight:
60 % (± 10 %) of crude protein,
5 % (± 3 %) of crude fibre,
5 % (± 3 %) of crude ash, and
3 % or more but not more than 6,9 % of starch,
for use in the manufacture of animal feed products
1.1.-31.12.
30 000 tonnes
0 %
09.2913
ex 2401 10 35
91
Natural unmanufactured tobacco, whether or not cut in regular size, having a custom value of not less than Euro 450 per 100 kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 2402 10 00
1.1.-31.12.
6 000 tonnes
0 %
ex 2401 10 70
10
ex 2401 10 95
11
ex 2401 10 95
21
ex 2401 10 95
91
ex 2401 20 35
91
ex 2401 20 70
10
ex 2401 20 95
11
ex 2401 20 95
21
ex 2401 20 95
91
09.2828
2712 20 90
Paraffin wax containing by weight less than 0,75 % of oil
1.1.-31.12.
120 000 tonnes
0 %
09.2600
ex 2712 90 39
10
Slack wax (CAS RN 64742-61-6)
1.1.-31.12.
100 000 tonnes
0 %
09.2928
ex 2811 22 00
40
Silica filler in the form of granules, with a purity by weight of 97 % or more of silicon dioxide
1.1.-31.12.
1 700 tonnes
0 %
09.2806
ex 2825 90 40
30
Tungsten trioxide, including blue tungsten oxide (CAS RN 1314-35-8 or CAS RN 39318-18-8)
1.1.-31.12.
12 000 tonnes
0 %
09.2872
ex 2833 29 80
40
Cesium sulphate (CAS RN 10294-54-9) in solid form or as aqueous solution containing by weight 48 % or more but not more than 52 % of cesium sulphate
1.1.-31.12.
160 tonnes
0 %
09.2929
2903 22 00
Trichloroethylene (CAS RN 79-01-6)
1.1.-31.12.
15 000 tonnes
0 %
09.2837
ex 2903 79 30
20
Bromochloromethane (CAS RN 74-97-5)
1.1.-31.12.
600 tonnes
0 %
09.2933
ex 2903 99 80
30
1,3-Dichlorobenzene (CAS RN 541-73-1)
1.1.-31.12.
2 600 tonnes
0 %
09.2700
ex 2905 12 00
10
Propan-1-ol (propyl alcohol) (CAS RN 71-23-8)
1.1.-31.12.
15 000 tonnes
0 %
09.2830
ex 2906 19 00
40
Cyclopropylmethanol (CAS RN 2516-33-8)
1.1.-31.12.
20 tonnes
0 %
09.2851
ex 2907 12 00
10
O-Cresol (CAS RN 95-48-7) having a purity of not less than 98,5 % by weight
1.1.-31.12.
20 000 tonnes
0 %
09.2704
ex 2909 49 80
20
2,2,2′,2′-Tetrakis(hydroxymethyl)-3,3′-oxydipropan-1-ol (CAS RN 126-58-9)
1.1.-31.12.
500 tonnes
0 %
09.2624
2912 42 00
Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde) (CAS RN 121-32-4)
1.1.-31.12.
1 950 tonnes
0 %
09.2683
ex 2914 19 90
50
Calcium acetylacetonate (CAS RN 19372-44-2) for use in the manufacture of stabilisator systems in tablet form
1.1.-31.12.
150 tonnes
0 %
09.2852
ex 2914 29 00
60
Cyclopropyl methyl ketone (CAS RN 765-43-5)
1.1.-31.12.
300 tonnes
0 %
09.2638
ex 2915 21 00
10
Acetic acid (CAS RN 64-19-7) of a purity by weight of 99 % or more
1.1.-31.12.
1 000 000 tonnes
0 %
09.2972
2915 24 00
Acetic anhydride (CAS RN 108-24-7)
1.1.-31.12.
50 000 tonnes
0 %
09.2679
2915 32 00
Vinyl acetate (CAS RN 108-05-4)
1.1.-31.12.
350 000 tonnes
0 %
09.2728
ex 2915 90 70
85
Ethyl trifluoroacetate (CAS RN 383-63-1)
1.1.-31.12.
400 tonnes
0 %
09.2665
ex 2916 19 95
30
Potassium (E,E)-hexa-2,4-dienoate (CAS RN 24634-61-5)
1.1.-31.12.
8 250 tonnes
0 %
09.2684
ex 2916 39 90
28
2,5-dimethylphenylacetyl chloride (CAS RN 55312-97-5)
1.1.-31.12.
400 tonnes
0 %
09.2769
ex 2917 13 90
10
Dimethyl sebacate (CAS RN 106-79-6)
1.1.-31.12.
1 000 tonnes
0 %
09.2634
ex 2917 19 80
40
Dodecanedioic acid (CAS RN 693-23-2), of a purity by weight of more than 98,5 %
1.1.-31.12.
4 600 tonnes
0 %
09.2808
ex 2918 22 00
10
O-acetylsalicylic acid (CAS RN 50-78-2)
1.1.-31.12.
120 tonnes
0 %
09.2646
ex 2918 29 00
75
Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate (CAS RN 2082-79-3) with
a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight, and
a melting point of 49 °C or more but not more than 54 °C,
for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates)
1.1.-31.12.
380 tonnes
0 %
09.2647
ex 2918 29 00
80
Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8)
with a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, and
a melting point of 110 °C or more but not more than 125 °C,
for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates)
1.1.-31.12.
140 tonnes
0 %
09.2975
ex 2918 30 00
10
Benzophenone-3,3′,4,4′-tetracarboxylic dianhydride (CAS RN 2421-28-5)
1.1.-31.12.
1 000 tonnes
0 %
09.2688
ex 2920 29 00
70
Tris (2,4-di-tert-butylphenyl)phosphite (CAS RN 31570-04-4)
1.1.-31.12.
6 000 tonnes
0 %
09.2648
ex 2920 90 10
70
Dimethyl Sulphate (CAS RN 77-78-1)
1.1.-31.12.
18 000 tonnes
0 %
09.2649
ex 2921 29 00
60
Bis(2-dimethylaminoethyl)(methyl)amine (CAS RN 3030-47-5)
1.1.-31.12.
1 700 tonnes
0 %
09.2682
ex 2921 41 00
10
Aniline (CAS RN 62-53-3) with a purity by weight of 99 % or more
1.1.-31.12.
150 000 tonnes
0 %
09.2617
ex 2921 42 00
89
4-Fluoro-N-(1-methylethyl)benzeneamine (CAS RN 70441-63-3)
1.1.-31.12.
500 tonnes
0 %
09.2602
ex 2921 51 19
10
O-phenylenediamine (CAS RN 95-54-5)
1.1.-31.12.
1 800 tonnes
0 %
09.2730
ex 2921 59 90
80
4,4′-Methanediyldianiline (CAS RN 101-77-9) in form of granules, for use in the manufacture of prepolymers
1.1.-31.12.
200 tonnes
0 %
09.2854
ex 2924 19 00
85
3-Iodoprop-2-ynyl N-butylcarbamate (CAS RN 55406-53-6)
1.1.-31.12.
250 tonnes
0 %
09.2874
ex 2924 29 70
87
Paracetamol (INN) (CAS RN 103-90-2)
1.1.-31.12.
20 000 tonnes
0 %
09.2742
ex 2926 10 00
10
Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of chapter 55 and heading 6815
1.1.-31.12.
50 000 tonnes
0 %
09.2856
ex 2926 90 70
84
2-Nitro-4(trifluoromethyl)benzonitrile (CAS RN 778-94-9)
1.1.-31.12.
900 tonnes
0 %
09.2708
ex 2928 00 90
15
Monomethylhydrazine (CAS 60-34-4) in the form of an aqueous solution with a content by weight of monomethylhydrazine of 40 (± 5) %
1.1.-31.12.
900 tonnes
0 %
09.2685
ex 2929 90 00
30
Nitroguanidine (CAS RN 556-88-7)
1.1.-31.12.
6 500 tonnes
0 %
09.2842
2932 12 00
2-Furaldehyde (furfuraldehyde)
1.1.-31.12.
10 000 tonnes
0 %
09.2955
ex 2932 19 00
60
Flurtamone (ISO) (CAS RN 96525-23-4)
1.1.-31.12.
300 tonnes
0 %
09.2696
ex 2932 20 90
25
Decan-5-olide (CAS RN 705-86-2)
1.1.-31.12.
6 000 kilograms
0 %
09.2697
ex 2932 20 90
30
Dodecan-5-olide (CAS RN 713-95-1)
1.1.-31.12.
6 000 kilograms
0 %
09.2812
ex 2932 20 90
77
Hexan-6-olide (CAS RN 502-44-3)
1.1.-31.12.
4 000 tonnes
0 %
09.2858
2932 93 00
Piperonal (CAS RN 120-57-0)
1.1.-31.12.
220 tonnes
0 %
09.2878
ex 2933 29 90
85
Enzalutamide INN (CAS RN 915087-33-1)
1.1.-31.12.
1 000 kilograms
0 %
09.2673
ex 2933 39 99
43
2,2,6,6-Tetramethylpiperidin-4-ol (CAS RN 2403-88-5)
1.1.-31.12.
1 000 tonnes
0 %
09.2674
ex 2933 39 99
44
Chlorpyrifos (ISO) (CAS RN 2921-88-2)
1.1.-31.12.
9 000 tonnes
0 %
09.2880
ex 2933 59 95
39
Ibrutinib (INN) (CAS RN 936563-96-1)
1.1.-31.12.
5 tonnes
0 %
09.2860
ex 2933 69 80
30
1,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5)
1.1.-31.12.
600 tonnes
0 %
09.2658
ex 2933 99 80
73
5-(Acetoacetylamino)benzimidazolone (CAS RN 26576-46-5)
1.1.-31.12.
400 tonnes
0 %
09.2675
ex 2935 90 90
79
4-[[(2-Methoxybenzoyl)amino]sulfonyl]benzoyl chloride (CAS RN 816431-72-8)
1.1.-31.12.
1 000 tonnes
0 %
09.2710
ex 2935 90 90
91
2,4,4-Trimethylpentan-2-aminium (3R,5S,E)-7-(4-(4-fluorophenyl)-6-isopropyl-2-(N-methylmethylsulfonamido)pyrimidin-5-yl)-3,5-dihydroxyhept-6-enoate (CAS RN 917805-85-7)
1.1.-31.12.
5 000 kilograms
0 %
09.2945
ex 2940 00 00
20
D-Xylose (CAS RN 58-86-6)
1.1.-31.12.
400 tonnes
0 %
09.2686
ex 3204 11 00
75
Colourant C.I. Disperse Yellow 54 (CAS RN 7576-65-0) and preparations based thereon with a colourant C.I. Disperse Yellow 54 content of 99 % or more by weight
1.1.-31.12.
250 tonnes
0 %
09.2676
ex 3204 17 00
14
Preparations based on Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) with a content thereof of 60 % or more but less than 85 % by weight
1.1.-31.12.
50 tonnes
0 %
09.2698
ex 3204 17 00
30
Colourant C.I. Pigment Red 4 (CAS RN 2814-77-9) and preparations based thereon with a colourant C.I. Pigment Red 4 content of 60 % or more by weight
1.1.-31.12.
150 tonnes
0 %
09.2659
ex 3802 90 00
19
Soda flux calcinated diatomaceous earth
1.1.-31.12.
35 000 tonnes
0 %
09.2908
ex 3804 00 00
10
Sodium lignosulphonate (CAS RN 8061-51-6)
1.1.-31.12.
40 000 tonnes
0 %
09.2889
3805 10 90
Sulphate turpentine
1.1.-31.12.
25 000 tonnes
0 %
09.2935
ex 3806 10 00
10
Rosin and resin acids obtained from fresh oleoresins
1.1.-31.12.
280 000 tonnes
0 %
09.2832
ex 3808 92 90
40
Preparation containing 38 % or more but not more than 50 % by weight of pyrithione zinc (INN) (CAS RN 13463-41-7) in an aqueous dispersion
1.1.-31.12.
500 tonnes
0 %
09.2876
ex 3811 29 00
55
Additives consisting of reaction products of diphenylamine and branched nonenes containing by weight:
28 % or more but not more than 55 % of 4-monononyldiphenylamine,
45 % or more but not more than 65 % of 4,4′-dinonyldiphenylamine, and
not more than 5 % of 2,4-dinonyldiphenylamine and 2,4′-dinonyldiphenylamine,
for use in the manufacture of lubricating oils
1.1.-31.12.
900 tonnes
0 %
09.2814
ex 3815 90 90
76
Catalyst consisting of titanium dioxide and tungsten trioxide
1.1.-31.12.
3 000 tonnes
0 %
09.2820
ex 3824 79 00
10
Mixtures containing by weight:
60 % or more but not more than 90 % of 2-chloropropene (CAS RN 557-98-2),
8 % or more but not more than 14 % of (Z)-1-chloropropene (CAS RN 16136-84-8),
5 % or more but not more than 23 % of 2-chloropropane (CAS RN 75-29-6),
not more than 6 % of 3-chloropropene (CAS RN 107-05-1), and
not more than 1 % of ethyl chloride (CAS RN 75-00-3)
1.1.-31.12.
6 000 tonnes
0 %
09.2644
ex 3824 99 92
77
Preparation containing by weight:
55 % or more but not more than 78 % of dimethyl glutarate,
10 % or more but not more than 30 % of dimethyl adipate, and
not more than 35 % of dimethyl succinate
1.1.-31.12.
10 000 tonnes
0 %
09.2681
ex 3824 99 92
85
Mixture of bis [3-(triethoxysilyl)propyl]sulphides (CAS RN 211519-85-6)
1.1.-31.12.
9 000 tonnes
0 %
09.2650
ex 3824 99 92
87
Acetophenone (CAS RN 98-86-2), with a purity by weight of 60 % or more but not more than 90 %
1.1.-31.12.
2 000 tonnes
0 %
09.2888
ex 3824 99 92
89
Mixture of tertiary alkyldimethyl amines containing by weight:
60 % or more but not more than 80 % of dodecyldimethylamine (CAS RN 112-18-5), and
20 % or more but not more than 30 % of dimethyl(tetradecyl)amine (CAS RN 112-75-4)
1.1.-31.12.
16 000 tonnes
0 %
09.2829
ex 3824 99 93
43
Solid extract of the residual, insoluble in aliphatic solvents, obtained during the extraction of rosin from wood, having the following characteristics:
a resin acid content not exceeding 30 % by weight,
an acid number not exceeding 110, and
a melting point of 100 °C or more
1.1.-31.12.
1 600 tonnes
0 %
09.2907
ex 3824 99 93
67
Mixture of phytosterols, in the form of powder, containing by weight:
75 % or more of sterols, and
not more than 25 % of stanols,
for use in the manufacture of stanols/sterols or stanol/sterol esters
1.1.-31.12.
2 500 tonnes
0 %
09.2639
3905 30 00
Poly(vinyl alcohol), whether or not containing unhydrolysed acetate groups
1.1.-31.12.
15 000 tonnes
0 %
09.2671
ex 3905 99 90
81
Poly(vinyl butyral)(CAS RN 63148-65-2):
containing by weight 17,5 % or more but not more than 20 % of hydroxyl groups, and
with a median particle size (D50) of more than 0,6 mm
1.1.-31.12.
12 500 tonnes
0 %
09.2846
ex 3907 40 00
25
Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of not less than 98,5 % by weight, in the form of pellets or granules, with a luminous transmittance of not less than 88,5 %, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2)
1.1.-31.12.
2 000 tonnes
0 %
09.2723
ex 3911 90 19
10
Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-4,4′-biphenylene)
1.1.-31.12.
5 000 tonnes
0 %
09.2816
ex 3912 11 00
20
Cellulose acetate flakes
1.1.-31.12.
75 000 tonnes
0 %
09.2864
ex 3913 10 00
10
Sodium alginate, extracted from brown seaweed (CAS RN 9005-38-3)
1.1.-31.12.
10 000 tonnes
0 %
09.2641
ex 3913 90 00
87
Sodium hyaluronate, non sterile, with:
a weight average molecular weight (Mw) of not more than 900 000,
an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg,
an ethanol content of not more than 1 % by weight, and
an isopropanol content of not more than 0,5 % by weight
1.1.-31.12.
200 kilograms
0 %
09.2661
ex 3920 51 00
50
Sheets of polymethylmethacrylate conforming to standards:
EN 4364 (MIL-P-5425E) and DTD5592A, or
EN 4365 (MIL-P-8184) and DTD5592A
1.1.-31.12.
100 tonnes
0 %
09.2645
ex 3921 14 00
20
Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) × 100 cm (± 10 cm) × 40 cm (± 5 cm)
1.1.-31.12.
1 700 tonnes
0 %
09.2848
ex 5505 10 10
10
Waste of synthetic fibres (including noils, yarn waste, and garnetted stock) of nylon or other polyamides (PA6 and PA66)
1.1.-31.12.
10 000 tonnes
0 %
09.2721
ex 5906 99 90
20
Woven and laminated rubberised textile fabric with the following characteristics:
with three layers,
one outer layer consists of acrylic fabric,
the other outer layer consists of polyester fabric,
the middle layer consists of chlorobutyl rubber,
the middle layer has a weight of 452 g/m2 or more but not more than 569 g/m2,
the textile fabric has a total weight of 952 g/m2 or more but not more than 1 159 g/m2, and
the textile fabric has a total thickness of 0,8 mm or more but not more than 4 mm,
for use in the manufacture of retractable roofs of motor vehicles
1.1.-31.12.
375 000 square meters
0 %
09.2866
ex 7019 12 00
06
S glass stratifils (rovings):
composed of continuous glass filaments of 9 μm (± 0,5 μm),
measuring 200 tex or more but not more than 680 tex,
not containing any calcium oxide, and
with a breaking strength of more than 3 550 MPa determined by ASTM D2343-09,
for use in the manufacture of aeronautics
1.1.-31.12.
1 000 tonnes
0 %
ex 7019 12 00
26
09.2870
ex 7019 40 00
70
E-fibre glass fabrics:
having a weight of 20 g/m2 or more but not more than 214 g/m2,
impregnated with silane,
in rolls,
having a humidity content by weight of 0,13 % or less, and
having not more than 3 hollow fibres out of 100 000 fibres,
for the exclusive use in the manufacture of prepregs and copper clad laminates
1.1.-30.6.
3 000 000 meters
0 %
ex 7019 52 00
30
09.2628
ex 7019 52 00
10
Glass web woven from glass fibre coated in plastic, of a weight of 120 g/m2 (± 10 g/m2), of a type for use in the manufacture of rolling insect screens with fixed frames
1.1.-31.12.
3 000 000 square meters
0 %
09.2799
ex 7202 49 90
10
Ferro-chromium containing 1,5 % or more but not more than 4 % by weight of carbon and not more than 70 % of chromium
1.1.-31.12.
50 000 tonnes
0 %
09.2652
ex 7409 11 00
20
Refined copper foil and strips, electrolytically coated
1.1.-31.12.
1 020 tonnes
0 %
ex 7410 11 00
30
09.2734
ex 7409 19 00
20
Plates or sheets consisting of:
a layer of a silicon nitride ceramic with a thickness of 0,32 mm (± 0,1 mm) or more but not more than 1,0 mm (± 0,1 mm),
covered on both sides with a foil of refined copper with a thickness of 0,8 mm (± 0,1 mm), and
on one side partially covered with a coating of silver
1.1.-31.12.
7 000 000 pieces
0 %
09.2662
ex 7410 21 00
55
Plates:
consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,
covered on one or both sides with copper foil with a thickness of not more than 0,15 mm,
with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,
with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, and
with a comparative tracking index (CTI) of 600 or more
1.1.-31.12.
80 000 square meters
0 %
09.2834
ex 7604 29 10
20
Aluminium alloy rods with a diameter of 200 mm or more but not exceeding 300 mm
1.1.-31.12.
2 000 tonnes
0 %
09.2835
ex 7604 29 10
30
Aluminium alloy rods with a diameter of 300,1 mm or more but not more than 533,4 mm
1.1.-31.12.
1 000 tonnes
0 %
09.2736
ex 7607 11 90
83
Aluminium and magnesium alloy strip or foil:
of an alloy conforming to standards 5182-H19 or 5052-H19,
in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,
of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,
of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm,
having a camber tolerance of not more than 0,4 mm/750 mm,
of a flatness measurement: I-unit ± 4,
having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, and
of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %,
for use in the manufacture of slats for blinds
1.1.-31.12.
600 tonnes
0 %
09.2906
ex 7609 00 00
20
Aluminium tube or pipe fittings for affixing to radiators of motor bikes
1.1.-31.12.
3 000 000 pieces
0 %
09.2722
8104 11 00
Unwrought magnesium, containing at least 99,8 % by weight of magnesium
1.1.-31.12.
80 000 tonnes
0 %
09.2840
ex 8104 30 00
20
Magnesium powder:
of purity by weight of 98 % or more but not more than 99,5 %, and
with a particle size of 0,2 mm or more but not more than 0,8 mm
1.1.-31.12.
2 000 tonnes
0 %
09.2629
ex 8302 49 00
91
Aluminium telescopic handle for use in the manufacture of luggage
1.1.-31.12.
1 500 000 pieces
0 %
09.2720
ex 8413 91 00
50
Pump head for two cylinder high pressure pump made of forged steel, with:
milled threaded fittings with a diameter of 10 mm or more but not more than 36,8 mm, and
drilled fuel channels with a diameter of 3,5 mm or more but not more than 10 mm,
of a kind for use in the manufacture of diesel injection systems
1.1.-31.12.
65 000 pieces
0 %
09.2850
ex 8414 90 00
70
Aluminium alloy compressor wheel with:
a diameter of 20 mm or more but not more than 130 mm, and
a weight of 5 g or more but not more than 800 g,
for use in the assembly of turbochargers without further machining
1.1.-31.12.
5 900 000 pieces
0 %
09.2909
ex 8481 80 85
40
Exhaust valve for use in the manufacture of motorcycle exhaust gas systems
1.1.-31.12.
1 000 000 pieces
0 %
09.2738
ex 8482 99 00
20
Brass cages:
continuously or centrifugally cast,
turned,
containing by weight 35 % or more but not more than 38 % of tin,
containing by weight 0,75 % or more but not more than 1,25 % of lead,
containing by weight 1,0 % or more but not more than 1,4 % of aluminium, and
with a tensile strength of 415 Pa or more,
of a kind for use in the manufacture of ball bearings
35 000 pieces
0 %
09.2690
ex 8483 30 80
20
Wave slide bearing for axial applications, of FeP01 steel (according to EN 10130-1991) with a sliding layer of porous sinter bronze and poly(tetrafluoroethylene), suitable for installation into motor bike suspension units
1.1.-31.12.
1 500 000 pieces
0 %
09.2763
ex 8501 40 20
40
Electric AC commutator motor, single-phase, with an output of 250 W or more, an input power of 700 W or more but not more than 2 700 W, an external diameter of more than 120 mm (± 0,2 mm) but not more than 135 mm (± 0,2 mm), a rated speed of more than 30 000 rpm but not more than 50 000 rpm, equipped with air-inducting ventilator, for use in the manufacture of vacuum cleaners
1.1.-31.12.
2 000 000 pieces
0 %
ex 8501 40 80
30
09.2633
ex 8504 40 82
20
Electric rectifier, with a capacity of not more than 1 kVA, for use in the manufacture of appliances falling within subheading 8509 80 and heading 8510
1.1.-31.12.
4 500 000 pieces
0 %
09.2643
ex 8504 40 82
30
Power supply boards for use in the manufacture of goods falling under heading 8521 and 8528
1.1.-31.12.
15 000 000 pieces
0 %
09.2620
ex 8526 91 20
20
Assembly for GPS system having a position determination function, without display, and a weight of not more than 2 500 g, whether or not incorporated in a housing
1.1.-30.6. 2019
1 500 000 pieces
0 %
09.2672
ex 8529 90 92
75
Printed circuit board with LED diodes:
whether or not equipped with prisms/lens, and
whether or not fitted with connector(s),
for use in the manufacture of backlight units for goods of heading 8528
1.1.-31.12.
115 000 000 pieces
0 %
ex 9405 40 39
70
09.2003
ex 8543 70 90
63
Voltage controlled frequency generator, consisting of active and passive elements mounted on a printed circuit, contained in a housing with dimensions of not more than 30 mm × 30 mm
1.1.-31.12.
1 400 000 pieces
0 %
09.2910
ex 8708 99 97
75
Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 87
1.1.-31.12.
200 000 pieces
0 %
09.2694
ex 8714 10 90
30
Axle clamps, housings, fork bridges and clamping pieces, of aluminium alloy of a kind for use in the manufacture of motor bikes
1.1.-31.12.
1 000 000 pieces
0 %
09.2868
ex 8714 10 90
60
Pistons for suspension systems, having a diameter of not more than 55 mm, of sintered steel
1.1.-31.12.
2 000 000 pieces
0 %
09.2668
ex 8714 91 10
21
Bicycle frame, constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including e-bikes)
1.1.-31.12.
350 000 pieces
0 %
ex 8714 91 10
31
ex 8714 91 10
75
09.2631
ex 9001 90 00
80
Unmounted glass lenses, prisms and cemented elements for use in the manufacture or repair of goods of CN codes 9002, 9005, 9013 10 and 9015
1.1.-31.12.
5 000 000 pieces
0 %
09.2932
ex 9027 10 90
20
Lambda sensors for permanent incorporation into motor cycle exhaust systems
1.1.-31.12.
1 000 000 pieces
0 %

---
Source: https://www.legislation.gov.uk/eur/2018/2070 (the official version)
Page: https://openlegislation.uk/eu-regulation-2018-2070
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.