OpenLegislation

Division 18 Annexes (M):

United Kingdom

Original text. Later amendments are not shown.

The information that shall be included in the application is specified per authorisation case. An (x) in the column for the applicable authorisation case indicates that the information is mandatory (M) for this authorisation case.

Non standardised methodology
First authorisationRenewed type authorisationExtended area of useNew authorisationAuthorisation in conformity to type
18.1

The supporting evidence for the requirements capture in accordance with Article 13(1).

If the applicant uses the methodology set out in Annex I of Regulation (EU) No 402/2013, the supporting evidence consists of the declaration by the proposer referred to in Article 16 of Regulation (EU) No 402/2013 and the safety assessment report referred to in Article 15 of Regulation (EU) No 402/2013.

If another methodology is used, the evidence required is that necessary to demonstrate that it provides the same level of assurance as the methodology set out in Annex I of Regulation (EU) No 402/2013.

XXX
18.2Mapping table indicating where the information needed for the aspects to be assessed according to Annex II and III can be foundXXXX
18.3The relevant decisions for non-application of TSIs according to Article 7 of Directive (EU) 2016/797 (when applicable)XXXXX
18.4Declaration of conformity to the type and associated documentation (Article 24 Directive (EU) 2016/797)X
18.5EC Declarations of Verification for the mobile subsystems, including accompanying technical files (Article 15 Directive (EU) 2016/797).XXXX
18.6The file accompanying the application and the decision from the previous authorisation or when applicable the reference to the decision issued according to Article 46 and to the full accompanying file for the decision archived in the one-stop shop.XXX
18.7

Specification of and where applicablef1 a description of the methodology used for the requirements capture for the:

  1. (a)

    essential requirements for subsystems as specified in Article 3 and Annex III of Directive (EU) 2016/797;

  2. (b)

    technical compatibility of the subsystems within the vehicle;

  3. (c)

    safe integration of the subsystems within the vehicle; and

  4. (d)

    technical compatibility of the vehicle with the network in the area of use.

XXX
18.8CSM on risk assessment, safety assessment report (Article 15 Regulation (EU) No 402/2013) covering the requirements capture for the essential requirements ‘safety’ for the subsystems and safe integration between subsystems.XXX
18.9When not fully covered by TSIs and/or national rules, the documentary evidence of the technical compatibility of the vehicle with the network in the area of use.XXX
18.10Risk declaration (Article 16 Regulation (EU) No 402/2013) covering the requirements capture for the essential requirements ‘safety’ for the subsystems and safe integration between subsystems for aspects not covered by the TSIs and the national rules.XXX
18.11CSM on risk assessment, safety assessment report (Article 15 Regulation (EU) No 402/2013) covering the potential modification of the overall safety level for the vehicleXX
18.12Risk declaration (Article 16 Regulation (EU) No 402/2013) covering the potential modification of the overall safety level for the vehicleXX
18.13Information required for ERATV (according to Annex II of Decision 2011/665/EU)XXX
18.14Maintenance & operation documentation (including rescue), when not included in 18.4 and/or 18.5.XXX

Annotations

Footnotes

f1

Non standardised methodology