{
  "url": "https://openlegislation.uk/eu-regulation-2018-79/annex",
  "json_url": "https://openlegislation.uk/eu-regulation-2018-79/annex.json",
  "legislation": "eur/2018/79",
  "legislation_title": "Commission Regulation (EU) 2018/79 of 18 January 2018 amending Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2018-79",
  "path": "annex",
  "kind": "annex",
  "number": null,
  "heading": null,
  "text": "Annex I to Regulation (EU) No 10/2011 is amended as follows:\n(1) in point 1, Table 1 is amended as follows:\n(a) the entry concerning FCM substance No 856 is replaced by the following:\n‘\n856\n40563\n25101-28-4\n(butadiene, styrene, methyl methacrylate, butyl acrylate) copolymer cross-linked with divinylbenzene or 1,3-butanediol dimethacrylate\nyes\nno\nno\nOnly to be used in:\nrigid poly(vinyl chloride) (PVC) at a maximum level of 12 % at room temperature or below; or\nat up to 40 % w/w in blends of styrene acrylonitrile copolymer (SAN)/poly(methyl methacrylate) (PMMA) repeat-use articles at room temperature or below, and when either in contact only with aqueous, acidic and/or low alcoholic (< 20 %) foodstuffs for less than 1 day, or when in contact only with dry foodstuffs for any duration of time.\n’\n(b) the following entries are inserted in numerical order of the FCM substance numbers:\n‘\n1061\n80512-44-3\n2,4,4′-trifluorobenzophenone\nno\nyes\nno\nOnly to be used as a co-monomer in the manufacture of polyether ether ketone plastics up to 0,3 % w/w of the final material.\n1063\n1547-26-8\n2,3,3,4,4,5,5-heptafluoro-1-pentene\nno\nyes\nno\nOnly to be used together with tetrafluoroethylene and/or ethylene co-monomers to manufacture fluorocopolymers for application as polymer processing aid at up to 0,2 % w/w of the food contact material, and when the low-molecular mass fraction below 1 500 Da in the fluorocopolymer does not exceed 30 mg/kg.\n1064\n39318-18-8\ntungsten oxide\nyes\nno\nno\n0,05\nStoichiometry: WOn, n = 2,72-2,90\n(25)\n1065\n85711-28-0\nmixture of methyl-branched and linear C14-C18 alkanamides, derived from fatty acids\nyes\nno\nno\n5\nOnly to be used in the manufacture of articles made of polyolefins, and which do not come into contact with foods for which food simulant D2 is assigned in Table 2 of Annex III.\n(26)\n’\n(2) in point 3, in Table 3, the following entries are added:\n‘\n(25)\nWhen used as reheat agent in polyethylene terephthalate (PET) verification of compliance with the specific migration limit is not required; in all other cases compliance with the specific migration limit shall be verified in accordance with Article 18; the specific migration limit is expressed as mg tungsten/kg food.\n(26)\nMigration of stearamide, listed in Table 1 under FCM substance No 306 to which no specific migration limit applies, shall be excluded from verification of the compliance of the migration of the mixture with the specific migration limit laid down for the mixture.\n’",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2018/79/annex",
    "retrieved_at": "2026-11-01T14:44:18.547399+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}