# Council Regulation (EU) 2018/913 of 25 June 2018 amending Regulation (EU) No 1388/2013 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products, Annex I

Extent: E+W+S+N.I.

In the table in the Annex to Regulation (EU) No 1388/2013, the following rows are inserted according to the order of the CN codes indicated in the second column of that table:
Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).’
Order number
CN code
TARIC
Description
Quota period
Quota volume
Quota duty (%)
‘09.2726
ex 2906 11 00
10
Levomenthol (INN) (CAS RN 2216-51-5)
1.7.-31.12
185 tonnes
0 %
09.2728
ex 2915 90 70
85
Ethyl trifluoroacetate (CAS RN 383-63-1)
1.7.-31.12
200 tonnes
0 %
09.2684
ex 2916 39 90
28
2,5-dimethylphenylacetyl chloride (CAS RN 55312-97-5)
1.7.-31.12
125 tonnes
0 %
09.2730
ex 2921 59 90
80
4,4′-Methanediyldianiline (CAS RN 101-77-9) in form of granules, for use in the manufacture of prepolymers
1.7.-31.12
100 tonnes
0 %
09.2732
ex 2933 39 99
66
Fluazinam (ISO) (CAS RN 79622-59-6), with a purity by weight of 98,5 % or more
1.7.-31.12
100 tonnes
0 %
09.2734
ex 7409 19 00
20
Plates or sheets consisting of:
a layer of a silicon nitride ceramic with a thickness of 0,32 mm (± 0,1 mm) or more, but not more than 1,0 mm (± 0,1 mm),
covered on both sides with a foil of refined copper with a thickness of 0,8 mm (± 0,1 mm), and
on one side partially covered with a coating of silver
1.7.-31.12
3 500 000 pieces
0 %
09.2736
ex 7607 11 90
83
Aluminium and magnesium alloy strip or foil:
of an alloy conforming to standards 5182-H19 or 5052-H19,
in rolls with an outside diameter of not more than 1 350 mm,
of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,
a width (tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm,
a camber tolerance of not more than 0,5 mm/750 mm,
a flatness measurement of I-unit ± 5,
a tensile strength of more than (5182-H19) 365MPa or (5052-H19) 320MPa, and
an elongation at break of more than (5182-H19) 3 % or (5052-H19) 2,5 %,
for use in the manufacture of slats for blinds
1.7.-31.12.2018
300 tonnes
0 %

---
Source: https://www.legislation.gov.uk/eur/2018/913/annex/I (the official version)
Page: https://openlegislation.uk/eu-regulation-2018-913/annex-I
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.