OpenLegislation

Annex VII

United Kingdom

Original text. Later amendments are not shown.

Appendix 1 to Annex VII to Implementing Regulation (EU) 2015/504 is amended as follows:

  1. (1)

    in point 1, the words ‘Measured according to Annex III to Commission Delegated Regulation (EU) 2015/96’ are replaced by the words ‘Measured in accordance with Annex II to Commission Delegated Regulation (EU) 2018/985, as last amended by Commission Delegated Regulation (EU) …/… (1) (3)’;

  2. (2)

    point 2 is amended as follows:

    1. (a)

      the first and second indents are replaced by the following:

      • ‘Commission Delegated Regulation (EU) 2018/985, as last amended by Commission Delegated Regulation (EU) …/… (1) (3): yes/no (1); or

      • Regulation (EU) 2016/1628 of the European Parliament and of the Council, as last amended by (Commission Delegated) (1) Regulation (EU) …/… (of the European Parliament and of the Council) (1) (4): yes/no (1); or’;

    2. (b)

      the last indent is deleted;

  3. (3)

    points 2.1 and 2.2 are replaced by the following:

    ‘2.1.

    NRSC (2): … / ESC / WHSC (1) final test results (inclusive of Deterioration Factor) (6):

    Variant/Version………
    CO… g/kWh… g/kWh… g/kWh
    HC… g/kWh… g/kWh… g/kWh
    NOx … g/kWh… g/kWh… g/kWh
    HC + NOx … g/kWh… g/kWh… g/kWh
    PM… g/kWh… g/kWh… g/kWh
    PN… #/kWh… #/kWh… #/kWh

    2.2.

    Non-road transient test cycle (7): … / ETC / WHTC (1) final test results (inclusive of Deterioration Factor) (8):

    Variant/Version………
    CO… g/kWh… g/kWh… g/kWh
    HC… g/kWh… g/kWh… g/kWh
    NOx … g/kWh… g/kWh… g/kWh
    HC + NOx … g/kWh… g/kWh… g/kWh
    PM… g/kWh… g/kWh… g/kWh
    PN… #/kWh… #/kWh… #/kWh

    ’

  4. (4)

    the following point 2.3 is inserted:

    ‘2.3.

    CO2 (9)

    Variant/Version………
    CO2 ………

    ’

  5. (5)

    the explanatory notes relating to Appendix 1 are amended as follows:

    1. (a)

      explanatory note (2) is replaced by the following:

      ‘(2)

      For vehicles fitted with engines tested in accordance with a non-road steady-state test cycle, indicate the test cycle in accordance with point 9.1 (Table 4) of the template for the single format of the test report set out in Appendix 1 to Annex VI to Implementing Regulation (EU) 2017/656.’;

    2. (b)

      explanatory note (4) is replaced by the following:

      ‘(4)

      Indicate only the latest amendment.’;

    3. (c)

      explanatory note (6) is replaced by the following:

      ‘(6)

      For each engine type fitted on every variant/version, indicate:

      1. (a)

        for engines tested in accordance with a non-road steady-state test cycle, copy the “Final test result with DF” results from Table 6 of the template for the single format of the test report set out in Appendix 1 to Annex VI to Implementing Regulation (EU) 2017/656,

      2. (b)

        for engines tested on heavy duty test cycles, indicate the final test results (inclusive of Deterioration Factor) of the ESC/WHSC test in accordance with Regulation (EC) No 595/2009.’;

    4. (d)

      the following explanatory notes (7) to (9) are added:

      ‘(7)

      For vehicles fitted with engines tested in accordance with a non-road transient test cycle, indicate the test cycle in accordance with point 10.1 (Table 8) of the template for the single format of the test report set out in Appendix 1 to Annex VI to Implementing Regulation (EU) 2017/656.

      (8)

      For each engine type fitted on every variant/version, indicate:

      1. (a)

        for engines tested in accordance with a non-road transient test cycle, copy the “Final test result with DF” results from Table 9 or, as applicable, from Table 10, of the template for the single format of the test report set out in Appendix 1 to Annex VI to Implementing Regulation (EU) 2017/656,

      2. (b)

        for engines tested on heavy duty test cycles, indicate the final test results (inclusive of Deterioration Factor) of the ETC/WHTC test in accordance with Regulation (EC) 595/2009.

      (9)

      For each engine type fitted on every variant/version, indicate:

      1. (a)

        for an engine type or engine family that is tested on both the NRSC and a non-road transient test cycle, copy, as applicable, the following values of the template for the single format of the test report set out in Appendix 1 to Annex VI to Implementing Regulation (EU) 2017/656: the hot cycle CO2 emissions values from the NRTC noted in point 10.3.4; the CO2 emissions values from the LSI-NRTC noted in point 10.4.4; or, for an engine only tested on an NRSC, indicate the CO2 emissions values given in that cycle from point 9.3.3,

      2. (b)

        for engines tested on heavy duty test cycles, indicate the CO2 result of the ESC/WHSC or ETC/WHTC test in accordance with Regulation (EC) 595/2009.’.