# Commission Implementing Regulation (EU) 2018/988 of 27 April 2018 amending and correcting Implementing Regulation (EU) 2017/656 laying down the administrative requirements relating to emission limits and type-approval of internal combustion engines for non-road mobile machinery in accordance with Regulation (EU) 2016/1628 of the European Parliament and of the Council (Text with EEA relevance), Annex I

Extent: E+W+S+N.I.

Annex I to Implementing Regulation (EU) 2017/656 is amended as follows:
(1) Part A is amended as follows:
(a) point 1.5.1 is replaced by the following:
‘1.5.1.
Where applicable, a copy of the demonstration reports set out in points 10.5.1 and 13.4.1 of Appendix 1 of Annex IV to Delegated Regulation (EU) 2017/654’;
(b) the following points 1.5.2 and 1.5.3 are inserted:
‘1.5.2.
Where applicable, a description of the connection for, and method to read, the records set out in point 5.2.1.1.(e) of Appendix 1 of Annex IV to Delegated Regulation (EU) 2017/654 and point 4.1 of Appendix 2 of that Annex;
1.5.3.
Where the engine type or engine family is member of a NCD engine family, a justification of its membership together with the information requested in points 1.5, 1.5.1 and 1.5.2 on the NCD engine family may be supplied alternatively, upon agreement of the approval authority;’;
(c) point 1.6.1 is replaced by the following:
‘1.6.1.
Where applicable, a copy of the demonstration report set out in point 9.3.6.1 of Appendix 4 of Annex IV to Delegated Regulation (EU) 2017/654’;
(d) the following points 1.6.2 and 1.6.3 are inserted:
‘1.6.2.
Where applicable, a description of the connection for, and method to read, the records set out in point 5.4 of Appendix 4 of Annex IV to Delegated Regulation (EU) 2017/654 and point 4.1 of Appendix 2 of that Annex;
1.6.3.
Where the engine type or engine family is member of a PCD engine family, a justification of its membership together with the information requested in points 1.6, 1.6.1 and 1.6.2 on the PCD engine family may be supplied alternatively, upon agreement of the approval authority;’;
(2) Appendix 3 is amended as follows:
(a) Part B is amended as follows:
(i) point 2.10.4 is replaced by the following:
‘2.10.4.
Others: Yes/No
(if yes, complete section 3.10.4 and provide a schematic diagram of the location and order of the devices)’;
(ii) point 2.11.9 is replaced by the following:
‘2.11.9.
Other devices or features that have a strong influence on emissions: Yes/No
(if yes, complete section 3.11.7)’;
(b) in Part C, the table is amended as follows:
(i) the following row with item number 3.4.6.1 is inserted:
‘
3.4.6.1.
In case of RMC, number of pre-conditioning RMC prior to RMC NRSC test
X
Minimum 0,5
’
(ii) the following rows with item numbers 3.10.3 to 3.10.4.1 are inserted:
‘
3.10.3.
Air injection
3.10.3.1.
Operation principle:
X
3.10.4.
Other(s)
3.10.4.1.
Type(s):
X
’
(iii) the following row with item number 3.11.1.3.1 is inserted:
‘
3.11.1.3.1.
Test conditions for measurement:
X
X
’
(iv) the following rows with item numbers 3.11.7 and 3.11.7.1 are inserted:
‘
3.11.7.
Other device(s) or feature(s)
3.11.7.1.
Type(s):
X
’

---
Source: https://www.legislation.gov.uk/eur/2018/988/annex/I (the official version)
Page: https://openlegislation.uk/eu-regulation-2018-988/annex-I
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.