# Commission Implementing Regulation (EU) 2018/988 of 27 April 2018 amending and correcting Implementing Regulation (EU) 2017/656 laying down the administrative requirements relating to emission limits and type-approval of internal combustion engines for non-road mobile machinery in accordance with Regulation (EU) 2016/1628 of the European Parliament and of the Council (Text with EEA relevance), Annex VII

Extent: E+W+S+N.I.

Annex VI to Implementing Regulation (EU) 2017/656 is corrected as follows:
(1) point 2.6 is replaced by the following:
‘2.6.
The test report may be delivered on paper or in an electronic format agreed between the manufacturer, technical service and approval authority.’;
(2) Appendix 1 is corrected as follows:
(i) points 10 to 11.2 are replaced by the following:
‘10.
Information concerning the conduct of the transient test (if applicable)
10.1.
Cycle (mark cycle with X) to be stated in Table 8:
Table 8
Transient test cycle
NRTC
LSI-NRTC
10.2.
Transient test deterioration factors:
10.2.1. Deterioration Factor (DF): calculated/fixed
10.2.2. DF values and the emissions results to be stated in Table 9 or Table 10
10.3.
NRTC emission results:
Table 9
DF values and the emissions results for NRTC
DFmult/add
CO
HC
NOx
HC+NOx
PM
PN
Emissions
CO (g/kWh)
HC (g/kWh)
NOx (g/kWh)
HC+NOx (g/kWh)
PM (g/kWh)
PN (#/kWh)
Cold start
Hot start test result
with/without regeneration
Weighted test result
k ru/k rd
mult/add
Weighted test result with IRAFs
Final test result with DF
10.3.1. Hot cycle CO2 (g/kWh):
10.3.2. Cycle average NH3 (ppm):
10.3.3. Cycle work for hot start test (kWh):
10.3.4. Cycle CO2 for hot start test (g):
10.4.
LSI-NRTC emission results
Table 10
DF values and the emissions results for LSI- NRTC
DFmult/add
CO
HC
NOx
HC+NOx
PM
PN
Emissions
CO (g/kWh)
HC (g/kWh)
NOx (g/kWh)
HC+NOx (g/kWh)
PM (g/kWh)
PN (#/kWh)
test result
with/without regeneration
k ru/k rd
mult/add
Test result with IRAFs
Final test result with DF
10.4.1. Cycle CO2 (g/kWh):
10.4.2. Cycle average NH3 (ppm):
10.4.3. Cycle work (kWh):
10.4.4. Cycle CO2 (g):
10.5.
Sampling system used for the transient test:
10.5.1. Gaseous emissions:
10.5.2. PM:
10.5.3. Particle number:
11.
Final emissions results
11.1.
Cycle emissions results to be stated in Table 11.
Table 11
Final emissions results
Emissions
CO(g/kWh)
HC(g/kWh)
NOx(g/kWh)
HC+NOx(g/kWh)
PM(g/kWh)
PN(#/kWh)
Test Cycle (1)
NRSC final result with DF (2).
Final transient test result with DF (3)
11.2.
CO2 result (4):
11.3.
In service monitoring reference values (5)
11.3.1.
Reference work (kWh) (6):
11.3.2.
Reference CO2 mass (g) (7):’;
(ii) the explanatory notes to Appendix 1 are replaced by the following:
‘ Explanatory notes to Appendix 1:
(Footnote markers, footnotes and explanatory notes not to be stated on the test report)
(1)
For NRSC indicate the cycle noted in point 9.1 (Table 4); for transient test indicate cycle noted in point 10.1 (Table 8).
(2)
Copy the “Final test result with DF” results from Table 6.
(3)
Copy “Final test result with DF” results from Table 9 or 10, as applicable.
(4)
For an engine type or engine family that is tested on both the NRSC and a transient cycle, indicate the hot cycle CO2 emissions values from the NRTC noted in point 10.3.4 or the CO2 emissions values from the LSI-NRTC noted in point 10.4.4. For an engine only tested on an NRSC indicate the CO2 emissions values given in that cycle noted in point 9.3.3.
(5)
Only applicable to engines of sub-categories NRE-v-5 and NRE-v-6 tested on NRTC.
(6)
Indicate the cycle work for hot start test value from the NRTC noted in point 10.3.3.
(7)
Indicate the cycle CO2 for hot start test value from the NRTC noted in point 10.3.4.’.

---
Source: https://www.legislation.gov.uk/eur/2018/988/annex/VII (the official version)
Page: https://openlegislation.uk/eu-regulation-2018-988/annex-VII
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.