# Regulation (EU) 2019/1009 of the European Parliament and of the Council of 5 June 2019 laying down rules on the making available on the market of EU fertilising products and amending Regulations (EC) No 1069/2009 and (EC) No 1107/2009 and repealing Regulation (EC) No 2003/2003 (Text with EEA relevance), Division 4.4.4.1.1.2

Extent: E+W+S+N.I.

Cut seven lengths of flexible detonating cord (point (b) under point 4.4.3) each 400 mm long, avoiding any loss of explosive at each end by making a clean cut and immediately sealing the end with adhesive. Push each of the seven lengths through each of the seven holes in the wooden or plastic disc (point (j) under point 4.4.3) until their ends project a few centimetres on the other side of the disc. Then insert a small split pin (point (l) under point 4.4.3) transversally into the textile sleeve of each length of cord 5 mm to 6 mm from the end and apply adhesive around the outside of the lengths of cord in a band 2 cm wide adjacent to the pin. Finally, pull the long piece of each cord to bring the pin into contact with the wooden or plastic disc.

---
Source: https://www.legislation.gov.uk/eur/2019/1009/annex/IV/part/II/division/2/division/4/division/4.4/division/4.4.4/division/4.4.4.1/division/4.4.4.1.1/division/4.4.4.1.1.2 (the official version)
Page: https://openlegislation.uk/eu-regulation-2019-1009/annex-IV/part-II/division-2/division-4/division-4.4/division-4.4.4/division-4.4.4.1/division-4.4.4.1.1/division-4.4.4.1.1.2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

