OpenLegislation

Division Part 2 Wastes and operations to which Article 7(4)(b) applies

United Kingdom

Original text. Later amendments are not shown.

The following operations are permitted for the purposes of Article 7(4)(b) in respect of the wastes specified, defined by the six-digit code as classified in Commission Decision 2000/532/ECf1.

Pre-treatment operations prior to permanent storage pursuant to this part of this Annex may be performed, provided that a substance listed in Annex IV that is isolated from the waste during the pre-treatment is subsequently disposed of in accordance with Part 1 of this Annex. In addition, repackaging and temporary storage operations may be performed prior to such pre-treatment or prior to permanent storage pursuant to this part of this Annex.

These limits apply exclusively to a landfill site for hazardous waste and do not apply to permanent underground storage facilities for hazardous waste, including salt mines.

F1. . .

‘Hexabromocyclododecane’ means hexabromocyclododecane, 1,2,5,6,9,10-hexabromocyclododecane and its main diastereoisomers: alpha- hexabromocyclododecane, beta- hexabromocyclododecane and gamma- hexabromocyclododecane.

F2. . .
F3. . .

The calculation method laid down in F4British standards BS EN 12766-1:2000, BS 2000-462:2001, BS EN 12766-2:2001 and BS 2000-462.2:2001 shall apply.

Wastes as classified in Decision 2000/532/ECMaximum concentration limits of substances listed in Annex IVf2 Operation
10WASTES FROM THERMAL PROCESSES

Alkanes C10-C13, chloro (short-chain chlorinated paraffins) (SCCPs): 10 000 mg/kg;

  • Aldrin: 5 000 mg/kg;

  • Chlordane: 5 000 mg/kg;

  • Chlordecone: 5 000 mg/kg;

  • DDT (1,1,1-trichloro-2,2-bis (4-chlorophenyl) ethane): 5 000 mg/kg;

  • Dieldrin: 5 000 mg/kg;

  • Endosulfan: 5 000 mg/kg;

  • Endrin: 5 000 mg/kg;

  • Heptachlor: 5 000 mg/kg;

  • Hexabromobiphenyl: 5 000 mg/kg;

  • Hexabromocyclododecanef3: 1 000 mg/kg;

  • Hexachlorobenzene: 5 000 mg/kg;

  • Hexachlorobutadiene: 1 000 mg/kg;

  • Hexachlorocyclohexanes, including lindane: 5 000 mg/kg;

  • Mirex: 5 000 mg/kg;

  • Pentachlorobenzene: 5 000 mg/kg;

  • Perfluorooctane sulfonic acid and its derivatives (PFOS) (C8F17SO2X) (X = OH, Metal salt (O-M+), halide, amide, and other derivatives including polymers): 50 mg/kg;

  • Polychlorinated Biphenyls (PCB)f4: 50 mg/kg;

  • Polychlorinated dibenzo-p-dioxins and dibenzofurans: 5 mg/kg;

  • Polychlorinated naphthalenes (*): 1 000 mg/kg;

  • F5Sum of the concentrations of tetrabromodiphenyl ether (C12H6Br4O), pentabromodiphenyl ether (C12H5Br5O), hexabromodiphenyl ether (C12H4Br6O), heptabromodiphenyl ether (C12H3Br7O) and decabromodiphenyl ether (C12Br10O;

  • Toxaphene: 5 000 mg/kg F6;

  • Sum of the concentrations of Pentachlorophenol, its salts, and its esters: 1000 mg/kg;

  • Dicofol: 5000 mg/kg;

  • Perfluorooctanoic acid (PFOA), its salts and PFOA-related compounds (as defined in Annex 1): 50 mg/kg for the sum of the concentrations of PFOA and its salts, 2000 mg/kg for the sum of the concentrations of PFOA-related compounds;

  • Perfluorohexane sulfonic acid (PFHxS), its salts and PFHxS-related compounds (as defined in Annex 1): 50 mg/kg for the sum of the concentrations of PFHxS and its salts, 2000 mg/kg for the sum of the concentrations of PFHxS-related compounds

Permanent storage shall be allowed only when all the following conditions are met:

  1. (1)

    The storage takes place in one of the following locations:

    • safe, deep, underground, hard rock formations,

    • salt mines,

    • a landfill site for hazardous waste, provided that the waste is solidified or partly stabilised where technically feasible as required for classification of the waste in subchapter 19 03 of Decision 2000/532/EC.

  2. (2)

    F7The provisions of the Landfill Regulations were respected.

  3. (2A)

    In point (2), the “Landfill Regulations” means—

    1. (a)

      in relation to England and Wales, the Environmental Permitting (England and Wales) Regulations 2016;

    2. (b)

      in relation to Scotland, the Landfill (Scotland) Regulations 2003.

  4. (3)

    It has been demonstrated that the selected operation is environmentally preferable.

10 01Wastes from power stations and other combustion plants (except 19)
F810 01 03 Fly ash from peat and untreated wood
10 01 14 * Bottom ash, slag and boiler dust from co-incineration containing hazardous substances
10 01 16 *Fly ash from co-incineration containing hazardous substances
10 02Wastes from the iron and steel industry
10 02 07 *Solid wastes from gas treatment containing hazardous substances
10 03Wastes from aluminium thermal metallurgy
10 03 04 *Primary production slags
10 03 08 *Salt slags from secondary production
10 03 09 *Black drosses from secondary production
10 03 19 *Flue-gas dust containing hazardous substances
10 03 21 *Other particulates and dust (including ball-mill dust) containing hazardous substances
10 03 29 *Wastes from treatment of salt slags and black drosses containing hazardous substances
10 04Wastes from lead thermal metallurgy
10 04 01 *Slags from primary and secondary production
10 04 02 *Dross and skimmings from primary and secondary production
10 04 04 *Flue-gas dust
10 04 05 *Other particulates and dust
10 04 06 *Solid wastes from gas treatment
10 05Wastes from zinc thermal metallurgy
10 05 03 *Flue-gas dust
10 05 05 *Solid waste from gas treatment
10 06Wastes from copper thermal metallurgy
10 06 03 *Flue-gas dust
10 06 06 *Solid wastes from gas treatment
10 08Wastes from other non-ferrous thermal metallurgy
10 08 08 *Salt slag from primary and secondary production
10 08 15 *Flue-gas dust containing hazardous substances
10 09Wastes from casting of ferrous pieces
10 09 09 *Flue-gas dust containing hazardous substances
16WASTES NOT OTHERWISE SPECIFIED IN THE LIST
16 11Waste linings and refractories
16 11 01 *Carbon-based linings and refractories from metallurgical processes containing hazardous substances
16 11 03 *Other linings and refractories from metallurgical processes containing hazardous substances
17CONSTRUCTION AND DEMOLITION WASTES (INCLUDING EXCAVATED SOIL FROM CONTAMINATED SITES)
17 01Concrete, bricks, tiles and ceramics
17 01 06 *Mixtures of, or separate fractions of concrete, bricks, tiles and ceramics containing hazardous substances
17 05Soil (including excavated soil from contaminated sites), stones and dredging spoil
17 05 03 *Soil and stones containing hazardous substances
F917 05 04 Soil and stones other than those mentioned in 17 05 03*
17 09Other construction and demolition wastes
17 09 02 *Construction and demolition wastes containing PCB, excluding PCB containing equipment
17 09 03 *Other construction and demolition wastes (including mixed wastes) containing hazardous substances
19WASTES FROM WASTE MANAGEMENT FACILITIES, OFF-SITE WASTE WATER TREATMENT PLANTS AND THE PREPARATION OF WATER INTENDED FOR HUMAN CONSUMPTION AND WATER FROM INDUSTRIAL USE
19 01Wastes from incineration or pyrolysis of waste
19 01 07 *Solid wastes from gas treatment
19 01 11 *Bottom ash and slag containing hazardous substances
19 01 13 *Fly ash containing hazardous substances
19 01 15 *Boiler dust containing hazardous substances
19 04Vitrified waste and waste from vitrification
19 04 02 *Fly ash and other flue-gas treatment wastes
19 04 03 *Non-vitrified solid phase

The maximum concentration limit of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD and PCDF) shall be calculated according to the following toxic equivalency factors (TEFs):

PCDDTEF
2,3,7,8-TeCDD1
1,2,3,7,8-PeCDD1
1,2,3,4,7,8-HxCDD0,1
1,2,3,6,7,8-HxCDD0,1
1,2,3,7,8,9-HxCDD0,1
1,2,3,4,6,7,8-HpCDD0,01
OCDD0,0003
PCDFTEF
2,3,7,8-TeCDF0,1
1,2,3,7,8-PeCDF0,03
2,3,4,7,8-PeCDF0,3
1,2,3,4,7,8-HxCDF0,1
1,2,3,6,7,8-HxCDF0,1
1,2,3,7,8,9-HxCDF0,1
2,3,4,6,7,8-HxCDF0,1
1,2,3,4,6,7,8-HpCDF0,01
1,2,3,4,7,8,9-HpCDF0,01
OCDF0,0003

Annotations

Textual amendments

F1

Words in Annex 5 Pt. 2 omitted (31.12.2020) by virtue of The Persistent Organic Pollutants (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1358), regs. 2(2), 28(3)(b)(i)

F2

Words in Annex 5 Pt. 2 omitted (31.12.2020) by virtue of The Persistent Organic Pollutants (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1358), regs. 2(2), 28(3)(b)(i)

F3

Words in Annex 5 Pt. 2 omitted (31.12.2020) by virtue of The Persistent Organic Pollutants (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1358), regs. 2(2), 28(3)(b)(i)

F4

Words in Annex 5 Pt. 2 substituted (31.12.2020) by The Persistent Organic Pollutants (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1358), regs. 2(2), 28(3)(b)(ii)

F5

Words in Annex 5 Pt. 2 substituted (1.4.2025) by The Persistent Organic Pollutants (Amendment) Regulations 2025 (S.I. 2025/296), regs. 1(1), 5(3)(a)

F6

Words in Annex 5 Pt. 2 inserted (1.4.2025) by The Persistent Organic Pollutants (Amendment) Regulations 2025 (S.I. 2025/296), regs. 1(1), 5(3)(b)

F7

Words in Annex 5 Pt. 2 substituted (31.12.2020) by The Persistent Organic Pollutants (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1358), regs. 2(2), 28(3)(a)

F8

Words in Annex 5 Pt. 2 inserted (1.4.2025) by The Persistent Organic Pollutants (Amendment) Regulations 2025 (S.I. 2025/296), regs. 1(1), 5(2)(a)

F9

Words in Annex 5 Pt. 2 inserted (1.4.2025) by The Persistent Organic Pollutants (Amendment) Regulations 2025 (S.I. 2025/296), regs. 1(1), 5(2)(b)

Footnotes

f1

Commission Decision 2000/532/EC of 3 May 2000 replacing Decision 94/3/EC establishing a list of wastes pursuant to Article 1(a) of Council Directive 75/442/EEC on waste and Council Decision 94/904/EC establishing a list of hazardous waste pursuant to Article 1(4) of Council Directive 91/689/EEC on hazardous waste (OJ L 226, 6.9.2000, p. 3).

f2

These limits apply exclusively to a landfill site for hazardous waste and do not apply to permanent underground storage facilities for hazardous waste, including salt mines.

f3

‘Hexabromocyclododecane’ means hexabromocyclododecane, 1,2,5,6,9,10-hexabromocyclododecane and its main diastereoisomers: alpha- hexabromocyclododecane, beta- hexabromocyclododecane and gamma- hexabromocyclododecane.

f4

The calculation method laid down in British standards BS EN 12766-1:2000, BS 2000-462:2001, BS EN 12766-2:2001 and BS 2000-462.2:2001 shall apply.